|
Home
> News >
Pressure transducer for budget conscious autosport applications
13th July 2008
 The AS motor-sport pressure transducer is an economical sub-miniature pressure sensor specially designed for use on auto-racing engines and chassis systems.
The body dimensions of the AS auto-sport pressure sensor are a compact 21mm in diameter by 24mm long which allows it to be used in almost any area of the racing vehicle. A variety of pressure connections appropriate to autosport applications are available and the electrical connection to the motorsport datalogger or engine management system is provided by a booted raychem DR25 cable protected to IP67. To ease installation the AS auto racing pressure transducer has a hex nut fitted to the back of the sensor to facilitate easier removal and fitting of the sensor into hard to reach or recessed areas. There are a choice of electrical signals for the AS motor racing pressure sensor to suit different autosport electronics: a 0.5 to 5 volt driven by a 8-16 volt power supply or a 0.5 to 4.5 volt ratiometric signal driven by a 5 volt power supply. All the typical motorsport pressure ranges are covered by the AS autosport pressure transducer starting from 1 bar gauge or absolute to cover lower ranges such as engine oil, airbox & fuel pressure and up to 400 bar for measuring hydraulic, pneumatic, fuel system & brake fluid pressures. The AS motorsport pressure sensor has a rugged construction to withstand a high vibration environment and low noise RFI filtering is incorporated into the electronics to protect the sensor from two way radio transmitter interference.
Related Products Minature pressure transducers Pressure calibration instrumentation Sensors and instruments for automotive testing
Resources Pressure converter Glossary of terms for pressure transducers
Home
> News >
Request Info | Ask a Question
|
Site Last Updated: 21/11/08
Resources
Contact
News
|
