0-5, 10V Transducers

Pressure Transducers with voltage outputs for gauge, absolute & differential pressure sensing where a high level voltage output is required.  A wide choice of high voltage outputs can be selected including 5V, 1-5V, 1-6V, 0-10V, 1-10V, 0.1-10.1V and 0.5-4.5V.

Specify your voltage output pressure transducer requirements

Low range amplified voltage output pressure transducers for measuring gauge, absolute and differential pressures below 1 bar (15 psi, 400 inWG, 1000 mbar or 30 inHg).

Low range pressure transducers with high voltage outputs for measuring pressures in the region between 1 and 100 bar (15 - 1500 psi).

High range pressure transducer with high volts output signal for measuring pressures above 100 bar (1500 psi).

Absolute reference pressure transducers with high voltage output signals for measuring the total pressure with respect to zero vacuum.

Digitally compensated highly accurate voltage output tranducers for measuring gauge, absolute and differential pressures. These transducers have good linearity, hysteresis, repeatability and small thermal errors over the operating temperature range to provide a laboratory grade pressure reading for critical research and test investigations.

Voltage output pressure transducers for measuring air pressure within air heating and cooling systems, air extraction and filtration and factory pneumatic air systems. Measure low level pressure differences on air handling systems either between to points in a duct or between the inside and outside of an air duct.

Monitor changes in atmospheric pressure with a transducer which converts the measured local air pressure of the atmosphere to a conditioned analogu voltage output. To fully utilise the available resolution of your measurement instrumentation the voltage output signal is scaled over the minimum and maximum expected atmospheric pressure such as 750 to 1150 mbar absolute or 11 to 17 psi absolute. For applications requiring a global or more extreme range such as high altitude testing in climatic chambers it is possible to provide custom ranges such as 500 to 1100 mbar absolute.

Barometric air pressure transducers which output a voltage signal scaled over a specific barometric pressure range such as 800 to 1200 mbar absolute or 24 to 35 inHg absolute. Unlike standard range pressure transducers these are custom configured with have an elevated zero volts output to improve resolution when measuring with an analog to digital converter or data acquisition device.

Differenital pressure transducers with amplified volts output for measuring the dp of liquids and gases.

Digital LED panel meters for connecting to amplified voltage output pressure transducers and displaying pressure readings in any pressure units with alarm outputs, triacs, peak hold and multichannel inputs.

Monitor temperature and pressure changes within the same transducer and output a voltage analogue output for each parameter. These transducers combing temperature sensing components in close proximity to the pressure sensing diaphragm to provide a fast response to media temperature changes without any the need for a intrusive temperature probe.

Flush fitting pressure transducers with high level voltage outputs and exposed diaphragms for use with media requiring hygienic compatibility such as food, beverage and pharmaceuticals or viscous fluids.

Measure the level of groundwater in a borehole with these voltage output pressure transducers. Each transducer is waterproof protected and designed to be lowered into a bore hole from the ground surface. The volts output is linear and proportional to the measured water depth pressure. A vent tube is provided running along the inside of the signal cable to provide atmospheric pressure reference.

Highly precise pressure transducers with amplified voltage output signals with accuracies ranging from 0.01% to 0.1% full scale accuracy.

Transducers with an analog voltage output for detecting very small changes in pressure or measuring pressure to a high precision. Typically a 16 bit digital amplifier is utilised to provide a high resolution output to make the most of the available resolution from analog to digital converters in data acquisition cards and other ADC instrumentation devices.

Convert the pressure of high temp media to voltage output with these transducers. High temperatures can be reduced by integrating a section of process connection that allows the process media temperature to dissipate into the surrounding environment before it reaches the heat sensitive components of the transducer.

Voltage output transducers for measuring hydraulic pressures on actuator, presses, pumps, valves, elevators, material test equipment and other high range hydraulic apparatus. These sensors have robust stainlesss steel constructions to withstand several 1000 psi.

Measure the hydrostatic pressure to determine the height of a liquid column with these voltage output transducers. These transducers provide a linear output that corresponds to the head of liquid above the transducer location. Choose hydrostatic transducers which can be mounted on the side or inside of a tank. Hydrostatic pressure transducers can be used to ensure a liquid head is manitained on a pump inlet to prevent cavitation or calculate the volume of fluid stored inside a container.

Voltage signal out pressure transducers protected to ingress protection rating of IP 68 which can be immersed in water or other compatible liquids. These pressure transducers have highly waterproof electrical interfaces for permanent installation underwater. IP68 pressure transducers are used to measure liquid level in storage tanks, ponds, rivers and boreholes.

Amplified voltage output pressure transducers for monitoring liquid level in tanks for storing water, wastewater, fuels, beverages, cargo and chemicals. These transducers measure liquid level by sensing the hydrostatic pressure pressing down on the transducer by the head of liquid above it. Choose from transducers designed to be dropped down into a tank or ones which can be fitted to the outside of the tank via a flange or threaded port.

These economical voltage output pressure transducers are designed for large quantity appplications such as incorporating industrial automation designs or a large engineering project where many of the same type of pressure transducer is fitted at several different locations.

Find a low pressure range dp transducer for measuring draft pressures in ventilation systems or air extraction systems. These transducers have two ports for connecting either side of a ventilation fan, filter or valve. Applications include building management systems, industrial air handling, clean room positive pressure and air scrubbing.

Small diameter and short length pressure transducers with amplified voltage output. These small volumes and low mass pressure transducers are designed for motorsport and research applications which have tight controls on additional weight and size or limited space to install the transducer.

Basic or custom designed pressure transducer packages for incorporating into your product design. These pressure transducers are used in measurement circuit designs which have 3 or 4 wire voltage input sensor conditioning electronics.

PVC and PVDF body transducers with analogue output in volts for measuring pressure of chemicals which are not compatible with stainless steel and other metals. These transducers have no metals part exposed to the process media and instead incorporate plastic materials to replace the mechanical parts such as the transducer housing and process connections. The sensing diaphragm is typically made from a ceramic material which which has much greater elasticity than plastic materials and is comparable in performance to stainless steel diaphragms.

Voltage signal transducers with an integral digital gauge for displaying and sending pressure readings. Pressure transducers with built-in gauge readouts include the same basic electrical functionality of a voltage output pressure transducer and in some also include additional functions such as configurable engineering units and alarm contact switches. No batteries are required since the digital gauge shares the power provided to the pressure transducer voltage signal circuit.

Pressure transducers with 5V or 10V output signals available for quick delivery. Select specification options and receive an immediate email quotation or order online and pay with a credit card.

Ratiometric voltage output pressure transducer with a 0.5 to 4.5 volt signal which is proportional to the nominal input supply voltage of 5 volt dc. Primarily used in automotive and motorsport appplications this type of amplified output pressure sensor can be used in any application requiring high output signal with low input supply voltage.

All stainless steel open diaphragm pressure transducers for sanitary applications such as monitoring food, brewing, medicine and dairy production processes. Sanitary processes require all materials exposed to the product to be 316 stainless steel with exposed surfaces to discourage build up of bacteria and ease cleaning, and if fluids are incorporated into the transducer design they should be non-harmful to humans if ingested.

Transducers with a small size and an amplified voltage output signal for specialised applications where a reduction in size or weight is important. These smaller sized pressure transducers have a smaller diameter and a shorter length than most industrial and process pressure transducers. Typically they are used for small scale research applications or fitted inside compact instrumentation packages.

Amplified output transducers for use in applications where the transducer will be in contact with high temperature steam in aplications such as sterilizing autoclaves, food and beverage processing and power generation. These transducers include integral cooling features for protecting the transducer electronics from steam temperatures which would otherwise cause damage to standard industrial pressure transducers.

Watertight volts out transducers for submerging to measure liquid depth/level or underwater system pressures. These transducers can be submerged underwater as part of a permanent installation such as in a borehole or a liquid storage tank. No installation mounting is required for these submersible transducers, each is fitted with a cable designed to support the weight of the transducer and cable, although it is recommend to lower inside a stilling well where the liquid is moving such as in tidal water or groundwater pumping installations. Submersible pressure transducers are typically vented to compensate for ambient pressure changes when measuring liquid depth, but non-vented versions are also available for applications where the cable is not brought to the surface.

Select transducers with a voltage output for measuring suction range pressures. These transducer have ranges from a few millibars to 1 bar (15 psi) to cover any full scale range from ambient zero pressure to max suction pressure. Use these transdcuers to generate an output signal from 0 to 5/10Vdc which varies linearly with applied suction pressure.

These high voltage output transducers will provide a linear signal of a few volts which is proportional to specified vacuum range. Use these transdcuers to measure over a small portion of the vacuum range such as 0 to 250 mbar absolute or over the whole vacuum range such as 0 to -15 psi gauge. Depending on your application preference manu of these transducers can be specified to measure vacuum either as a positive absolute pressure or a negative gauge pressure.

Amplified voltage output transducers compatible with waste water containing harsh chemicals and suspended solids. To protect from chemical corrosion these transducers are fitted with ceramic diaphragms. To aid cleaning and prevent build up of waste material which would affect measurement sensitivity, the transducer diaphragm is completely exposed to the media. These transdcuers are used for measuring the volume of wastewater inside a tank or the pressure inside a pipe pumping waste water.