enquiries@sensorsone.co.uk
- Instrument Type
- 4-20mA Transmitters
- 0-5, 10V Transducers
- mV/V Sensors
- Digital Sensors
- Absolute Sensors
- ATEX Transmitters
- Calibration Pumps
- Calibrators
- Compound Ranges
- Data Loggers
- Digital Gauges
- Digital Manometers
- Digital Readouts
- DP Transmitters
- Indicators - Pressure
- Liquid Level Sensors
- Suction Pressure Sensors
- Switches
- Accessories
- Your Application
- Absolute Reference
- Air/Pneumatics
- Barometric/Atmospheric
- Certificates & Approvals
- Data Logging
- Differential
- Flush Diaphragm
- Gauge Reference
- High Accuracy
- High Frequency Response
- High Range
- High Temperature
- Intrinsically Safe
- Leak Testing
- Level Measurement
- Low Ranges
- Measurement Signal
- Measuring Range
- Media Compatibility
- Miniature
- OEM Design
- Overpressure Protection
- PC Interfacing
- Pressure Calibration
- Process Connection
- Testing
- Sensor Technology
- Submersible
- Temperature & Pressure
- Vacuum
- Water Level
- Water Pressure
- Your Industry
- Manufacturers
DS210 Combined Low Pressure Switch, Indicator and Sensor
;)
Click Images to Enlarge
Low range three in one pressure switch, pressure indicator and pressure sensor for use on pneumatics and vacuum technology in a choice of ranges starting from 0 to 10 mbar gauge (4 inH2O) up to 0 to 1000 mbar gauge (400 inH2O) plus a 0 to -1000 mbar vacuum range. Compatible with gases, compressed air and low viscosity non-aggressive fluids.
Product Parameters
Pressure Ranges: 10 mb up to 1 bar g and -1 bar g
Accuracy: 0.35%FS > 0.1 bar, 0.5%FS <= 0.1 bar, IEC60770 (analogue output)
Output Signals: 4 to 20 mA 2 wire, 0 to 10 Volt 3 wire and Adjustable 4 to 20 mA 3 wire
Electrical Connections: DIN43650A plug & socket, cable gland, Binder 5 pin, M12 x 1 5-8 pin plastic or 5pin metal connector
Pressure Connections: G1/2 and G1/4 DIN3852 or EN837, G1/2 DIN3852 open port, 1/2 and 1/4 NPT male
Display: 4 digit red LED, ±0.1% FS ± 1 digit accuracy plus analogue output accuracy
Switch Contacts: PNP, 125 mA max for 4-20 mA (2 or 3 wire) and 500 mA max for 0-10 V output.
Environmental Protection: IP 65
Special Options: 5 to 1 rangeable, ATEX approved for hazardous areas
Product Description
The DS 210 low pressure switch, indicator and sensor utilises an exposed silicon diaphragm for extra sensitivity at low pressures whilst maintaining a high accuracy for the analogue output of 0.35% full scale for ranges above 100 mbar and 0.5% full scale for ranges below 100 mbar.
The digital LED display can be configured by the user to display in any pressure units and the 1 or 2 switch contacts can be set to trigger at any pressure within the range. The DS230 combined low pressure switch, readout and sensor is externally powered via a cable or connector exiting from the top of the instrument which is also used for the analogue output if specified.
Related Products
Pressure transmitters for measuring low level pressures
Battery powered pressure gauges for monitoring low pressures
Plug on LED meter for 4-20mA low range pressure transmitters
Panel mount digital readout for low pressure sensors
Download Product Information
tel: +44 (0)844 800 9440
- Product Finder - Choose multiple product and application types to filter out a suitable product
- Pressure Sensor Specifier - Select parameters to generate a pressure transducer or transmitter specification for your own use or to submit as an enquiry
- Digital Indicator Specifier - Select options for creating a specification for a digital indicator or digital controller for your own use or to submit as an enquiry
- Measuring vacuum pressure with negative gauge or absolute pressure ranges
» view article - What is the difference between a pressure transducer and a transmitter
» view article - What is the difference between gauge and absolute pressure measurement
» view article - What to consider when selecting a differential pressure sensor
» view article - What affects the performance of low pressure sensors
» view article - Supply voltage and load resistance considerations for pressure transmitters
» view article - Measuring liquid level in a sealed tank with a hydrostatic pressure sensor
» view article - Interpreting specifications of pressure sensor accuracy
» view article