Suction Pressure Sensors

Suction pressure sensors for measuring negative gauge reference pressure.  Select transducers and transmitter for measuring the level of vacuum pressure pulled down below ambient atmospheric pressure.

Negative gauge reference pressure sensor for measuring vacuum pressures relative to atmospheric pressure. Suction pressure ranges from -40mbar down to -1 bar gauge.

Piezo-resistive pressure transducer with a 2mV/V or 10mV/V output signal in pressure ranges from 0.25 bar up to 700 bar gauge or absolute.

Low range differential pressure sensor with rangeable 4-20mA current loop or amplified voltage output signal in pressure ranges from 1.6mb up to 6 bar differential

Differential pressure transmitter with high over-load capability for measuring low differential pressures from 8mb up to 6 bar differential.

ATEX approved flame-proof pressure transmitter for containing explosions where there is the potential for flammable process liquids or gases to ignite.

ATEX certified flame proof pressure transmitter with an open face pressure connection for use with pharmaceuticals or high viscosity media in hazardous areas requiring flame proof protection.

Motorsport pressure transducer with 21mm diameter and and 24mm body length for pressure ranges from 0.5 up to 400 bar gauge or absolute. Available with millivolt and amplified voltage output signals covering the majority of motorsport analogue input signals.

Marine approved pressure transmitter with 4-20mA current loop output for shipbuilding with optional CuNiFe wetted parts for sea-water compatibility in ranges from -1 to 600 bar gauge or absolute.

Pneumatic pressure sensor for measuring very low gauge reference pressures with ranges starting from 10 mbar (4 inH2O) up to 1000 mbar (400 inH2O) gauge. Ideal for use on pneumatic control systems, heating, ventilation and air conditioning systems (HVAC) and computer equipment rooms.

Marine approved stainless steel diaphragm pressure transmitter with 4-20mA current loop output for shipbuilding in ranges from 100mb to 600 bar gauge or absolute.

Low range three in one pressure switch, pressure indicator and pressure sensor for use on pneumatics and vacuum technology in a choice of ranges starting from 0 to 10 mbar gauge (4 inH2O) up to 0 to 1000 mbar gauge (400 inH2O) plus a 0 to -1000 mbar vacuum range. Compatible with gases, compressed air and low viscosity non-aggressive fluids.

Low cost ceramic diaphragm pressure transmitter available on a short lead time. Pressure ranges starting from 0-500 mbar up to 0-700 bar gauge or absolute. Electrical signals 4-20mA, 0-5V or 0-10V can be selected. A choice of DIN plug connector or integral cable can be specified for the electical interface.