Digital Manometers

Select a digital manometer for checking and testing pneumatic or hydraulic pressures. Select manometers by type of pressure connector, pressure media, precision and pressure range. Select manometers with features for selecting different pressure units, logging data and intrinsic safety.

Portable pressure indicator for use as a service test tool for checking pressure readings at various locations. These pressure instruments are connected to a pressure test point via a length of flexible hose which is pushed onto a barbed male pressure connector at both ends.

Low differential pressure measurement instrument for monitoring and testing draft pressures such as duct air pressure in a HVAC system. Connect the pressure monitor across a venturi plate, air filter, ventilation fan or pitot air probe to measure the differential pressure drop generated by the air flow.

Approved for use in areas which are classed as hazardous where explosive gases maybe present. These battery powered manometers have been certified to the ATEX standard for intrinsically safe use in Europe and in any other country where this EU standard is recognised.

Store pressure readings manually or at set time intervals within the internal memory of these manometers. Recall recorded data via the manometer user interface or upload logged data to a computer for documenting or importing into a database or spreadsheet.

Find a pressure manometer to measure low to high air pressures for checking pneumatic equipment such as air compressors, pressure regulators and workshop air supplies. Leak test vessels, chambers and pipework to a high accuracy by monitoring or recording pressure decay with a high resolution digital display over a set time period.

Select a high pressure manometer for testing hydraulic hoses, valves, actuators and pumps. Store highest measured reading for burst and destructive testing. Display hydraulic pressure in different units and monitor max or min pressures simultaneously with real time readings.

Measure pressures with reference to absolute zero vacuum independently of atmospheric pressure. Absolute range manometers can be used for leak testing sealed systems since they are not effected by changes in ambient air pressure which would otherwise cause an error in the readings.

Manometers with 2 pressure connections for connecting across a venturi, orifice plate, air filter or ventilation fan to measure the pressure drop or air-flow pressure. Check condition of filters and efficiency of airflow in HVAC systems, clean rooms, laboratories and computer rooms.

Mountable pressure display with a parallel thread pressure connection for fitting to a process connection or test equipment. These devices which have traditional style housings with a threaded stem are installed with a O ring gasket either on the tip or around the outside of male thread. This type of pressure connector requires very little torque for a leak tight seal.

Screw-in tapered thread pressure readout for fixed mounting to a manifold or pipe to measure air or liquid pressures. National pipe tapered threads are sealed by the interaction between the male and female threads. Thread sealing compound is applied or PTFE tape is wrapped around the male thread to ensure a leak tight seal.

Use a manometer as a reference standard for checking the accuracy of other pressure instrumentation on a regular basis. Measure pressures to a high precision and resolution and compare readings ith device under test to determine whether reading errors are outside performance parameter limits.

Connect a manometer to a desktop or laptop computer to transfer logged data or collect realtime readings as they are measured. Interface via RS232 or USB and manage data with the supplied PC software to generate reports with graphs and tabulated results.

4 to 20 milliamp powered manometers for providing a pressure transmitter output signal and a local reading of pressure. For use on a process plant where maintenance require a local display of pressure and a transmitter output for process control.