100 to 1000 mbar (1.5 to 15 psi) Ranges

Select a pressure sensor or instrument with a pressure range between 100 and 1000 millibar, 40 to 400 inches of water or 1 to 15 pounds per square inch.

Hand-held portable manometer for measuring positive and negative pressure ranges from 25 mbar up to 10 bar gauge or differential plus a 2 bar absolute. The measurement accuracy is 0.15% reading + 0.15% fs + 1 digit over a temperature range of -10 to +50°C. Optional leak detection, data logging and averaging filter functions.

Dual analogue output signal transmitter for simultaneous measurement of media pressure and temperature. Pressure ranges from 100 mbar up to 1000 bar and temperature measuring range from -25 to 100 DegC. To ensure good thermal contact with the media the temperature is measured just behind a flush diaphragm which has sufficient surface area to ensure minimal losses in media temperature at point of measurement.

Precision digital pressure gauge with ranges from 100 mbar (1.5 psi) up to 600 bar (9000 psi) gauge or absolute for measuring pneumatic or hydraulic pressures to an accuracy of 0.125% FS BSL. A selection of pressure fittings can be specified which include G1/2 & G1/4 male EN837 test point or 1/2 & 1/4 NPT male.

All stainless steel 316L hygienic digital display pressure gauge for measuring low range pressures with ranges from 0-100 mbar up to 0-40 bar gauge or absolute, including vacuum range 0 to -1 bar. This sanitary pressure gauge includes open diaphragm process fittings for threaded BSP, dairy pipe and Tri-clamp style process connections.

Robust industrial self powered logger for recording up to 130,000 pressure values with a minimum logging interval time of 2 seconds. Select a pressure from 0 to 100 mbar to as high as 0 to 1000 bar gauge or absolute.

High precision digital pressure gauge with 0.05% full scale accuracy, exchangable pressure range modules from 100 mbar (1.5 psi) up to 400 bar (6000 psi)gauge or absolute, in-built logging of pressure and temperature up to 8500 values and optional ATEX intrinsic safety.

Wet wet differential pressure sensor with a high overpressure rating on both positive and negative side port for protection against accidental diaphragm damage. The DMD 331 has 6 nominal pressure range from 0-0.2 bar up to 0-16 bar differential and each range has a choice of sub-ranges which can be selected depending on the required level of overpressure rating. The differential pressure signals can be transmitted as linear 4-20mA or 0-10Vdc analog output.

Small size dp sensor for measuring differential air pressure on HVAC, compress air and pneumatic control systems. The DMD341 is used to measure pressures in the range of 0-6 mbar up to 0-1000 mbar differential. An output signal of 4-20mA, 0-20mA or 0-10Vdc can be chosen to suit the signal conditioning of most air handling management systems.

Stainless steel pressure transmitter with ranges from 100mbar up to 40 bar gauge or absolute with optional accuracy ranging from the standard 0.35% FS up to 0.1% FS. Special options such as ATEX approval, SIL approval and compound ranges are also available.

High precision pressure transmitter with an accuracy of 0.1%FS BSL NLHR and digitally adjustable pressure ranges from 400mb up to 40 bar gauge & absolute

Sanitary pressure sensor wth exposed diaphragm with no crevices for high temperatures up to 300 Degrees Celsius in ranges from 100mb up to 40 bar gauge or absolute

Pneumatic pressure sensor for measuring very low gauge reference pressures with ranges starting from 10 mbar (4 inH2O) up to 1000 mbar (400 inH2O) gauge. Ideal for use on pneumatic control systems, heating, ventilation and air conditioning systems (HVAC) and computer equipment rooms.

High accuracy desktop pressure gauge for calibration and metrology laboratories with an accuracy of ±0.03% FS covering pressure ranges from 25mb up to 400 bar gauge, absolute including vacuum and bi-directional ranges.

Differential air pressure sensor with a 10 volt or a 4-20mA output for building ventilation applications. Designed for incorporating into a building HVAC management system to monitor and control the distribution of warm or cool air through ventilation ducts. Pressure ranges from 0 to 1 mbar up to 0 to 1000 mbar differential.

Three in one electronic pressure switch, digital pressure gauge and pressure sensor with pressure ranges from 100 mbar up to 600 bar (1.5 to 9000 psi) gauge or absolute.

Measure vacuum, positive gauge and absolute pressures from -1 bar (-15psi) up to 40 bar (600psi) with this all in one electronic switch, gauge and sensor. Designed specifically for use in the food, drink and biomedical industry for measuring process pressures and vessel contents. Choose dairy pipe or clamp type sanitary process fittings and select a food grade oil fill as the diaphragm isolation fluid. For pharmaceutical installations requiring hazardous dust protection the instrument includes the option for ATEX intrinsic safety.

Low range three in one pressure switch, pressure indicator and pressure sensor for use on pneumatics and vacuum technology in a choice of ranges starting from 0 to 10 mbar gauge (4 inH2O) up to 0 to 1000 mbar gauge (400 inH2O) plus a 0 to -1000 mbar vacuum range. Compatible with gases, compressed air and low viscosity non-aggressive fluids.

Low cost sensor for measuring small pressure ranges from 0-50 mbar (10 inH2O) to 0-1000 mbar (15 psi) of liquids or gases. Choose from a full list of outputs, electrical, connectors and accuracy specs to meet your OEM custom product integration requirements.

Marine approved level transmitter with 4-20mA current loop output for measuring the level of contents inside a ships ballast, fuel, liquid cargo or wastewater tanks with optional all CuNiFe construction for sea-water compatibility in ranges from 0.4 mH2O to 200mH2O gauge or absolute.

Digital pressure manometer for hazardous areas with pressure ranges from 100 mbar up to 2000 mbar differential or gauge plus 2000 mbar absolute. The reading accuracy is 0.1% reading plus 0.1% full scale + 1 digit over 20 to 30°C.

Passive compensated pressure transducer with a four arm semiconductor Wheatstone bridge circuit which produces a 100 millivolt with a 10 volt excitation. Pressure ranges from 0-100mbar up to 0-1000bar gauge or absolute. The silicon sensing chip is totally isolated from the media by an oil filled stainless steel 316L capsule with isolation membrane. This sensor is ideally suited for high frequency response applications since the output is only limited by the natural response of the silicon sensing capsule.

Rangeable DP Cell current loop process transmitter for monitoring differential pressures in a heavy duty process plant environment. The XMD has a standard process configuration with kidney flange mounting arrangement and large accessible electronic housing. Other features include ATEX intrinsic safety, linear or square root extraction 4-20mA output, HART communications, 10 to 1 turndown ranging, LCD readout and 130 bar overpressure protection on one side.