Milliamp Output Transmitters - Gauge Pressure

Gauge referenced pressure transmitters wit a 4-20mA current loop output signal for measuring pressure with a vented gauge reference to atmospheric pressure.

Low cost ceramic diaphragm pressure transmitter available on a short lead time. Pressure ranges starting from 1000 mbar up to 0-700 bar gauge or absolute. Electrical signals 4-20mA, 0-5V or 0-10V can be selected. A choice of DIN plug connector or integral cable can be specified for the electical interface.

High precision pressure transmitter with an accuracy of 0.1%FS BSL NLHR and digitally adjustable pressure ranges from 400mb up to 40 bar gauge & absolute

ATEX approved hydraulic pressure sensor for instrinsically safe use in hazardous areas with a 4-20mA current loop output signal in pressure ranges from 50 up to 1000 bar gauge

Dual analogue output signal transmitter for simultaneous measurement of media pressure and temperature. Pressure ranges from 100 mbar up to 1000 bar and temperature measuring range from -25 to 100 DegC. To ensure good thermal contact with the media the temperature is measured just behind a flush diaphragm which has sufficient surface area to ensure minimal losses in media temperature at point of measurement.

Screw-in pressure transmitter with flush stainless steel 316L diaphragm for measuring pressures of fluids with very high viscosity from 900 psi up to 6000 psi gauge or absolute. Options available for high temperatures up to 300 deg C and intrinsic safety.

Current output pressure transducer for measurement ranges from 0 to 2000 (30000 psi) range up to a maximum range of 6000 bar (90000 psi). All welded wetted parts and ATEX approved electronics for use in flammable gas or dust environments. Primarily used in hydraulic systems, waterjet torching and high pressure petrochemical applications. Accurate to 0.5% full scale output with adjustable zero and span trim via accessible potentiometers.

Stainless steel pressure transmitter with ranges from 100mbar up to 40 bar gauge or absolute with optional accuracy ranging from the standard 0.35% FS up to 0.1% FS. Special options such as ATEX approval, SIL approval and compound ranges are also available.

Sanitary pressure sensor wth exposed diaphragm with no crevices for high temperatures up to 300 Degrees Celsius in ranges from 100mb up to 40 bar gauge or absolute

Stainless steel 316L wetted parts pressure sensor for high pressure ranges from 60 bar (900 psi) up to 600 bar (9000 psi). Used on applications such as hydraulic test benches, presses, injection moulding machines, hydraulic actuation and vehicle hydraulic systems. Accurate to 0.35% FS with options for 0.25% or 0.1% FS. Good long term stability of 0.1% FS over a period of 1 year.

High performance transducer with adjustable scaling for modifying the pressure range for different applications. Ranges from 0-60 bar up to 0-600 bar gauge or absolute. The output signal is accurate to 0.1% of base range or 0.5% with a 10:1 turn-down, and a 14 bit analogue to digital conversion provides a high resolution amplified output. Optional software and interface kit is available for re-ranging the output signal.

Based around a high integrity all welded thin film strain gauge sensing element, this high range pressure transducer is designed for measuring hydraulic pressures up to 2200 bar (~32,000 psi) on equipment such as hydraulic presses, injection moulding machines and other high range monitoring and control systems.

Pneumatic pressure sensor for measuring very low gauge reference pressures with ranges starting from 10 mbar (4 inH2O) up to 1000 mbar (400 inH2O) gauge. Ideal for use on pneumatic control systems, heating, ventilation and air conditioning systems (HVAC) and computer equipment rooms.

Three in one electronic pressure switch, digital pressure gauge and pressure sensor with pressure ranges from 100 mbar up to 600 bar (1.5 to 9000 psi) gauge or absolute.

Measure vacuum, positive gauge and absolute pressures from -1 bar (-15psi) up to 40 bar (600psi) with this all in one electronic switch, gauge and sensor. Designed specifically for use in the food, drink and biomedical industry for measuring process pressures and vessel contents. Choose dairy pipe or clamp type sanitary process fittings and select a food grade oil fill as the diaphragm isolation fluid. For pharmaceutical installations requiring hazardous dust protection the instrument includes the option for ATEX intrinsic safety.

Combined sensor, electronic switch and digital gauge with an all welded stainless steel flush face diaphragm for measuring the pressure of high viscosity liquids or gases and fluid requiring a high level of cleanliness. Choose measuring ranges from 60 bar up to 400 bar with gauge or absolute reference. Select different sizes of BSP thread for a screw-in type pressure fitting. The integrated digital readout can be configured to read in any pressure units and process pressure limits can be set for controlling external equipment.

Low range three in one pressure switch, pressure indicator and pressure sensor for use on pneumatics and vacuum technology in a choice of ranges starting from 0 to 10 mbar gauge (4 inH2O) up to 0 to 1000 mbar gauge (400 inH2O) plus a 0 to -1000 mbar vacuum range. Compatible with gases, compressed air and low viscosity non-aggressive fluids.

Versatile low price pressure transducer with a wide selection of electrical and mechanical options to enable the customisation of the sensor to suit most industrial, automation and OEM design installations. A dry cell ceramic strain gauge sensing diaphragm provides a high corrosion resistance to many types of harsh chemical media commonly found in automated industrial processes and machinary monitoring applications.

Low cost sensor for measuring small pressure ranges from 0-50 mbar (10 inH2O) to 0-1000 mbar (15 psi) of liquids or gases. Choose from a full list of outputs, electrical, connectors and accuracy specs to meet your OEM custom product integration requirements.

Marine approved level transmitter with 4-20mA current loop output for measuring the level of contents inside a ships ballast, fuel, liquid cargo or wastewater tanks with optional all CuNiFe construction for sea-water compatibility in ranges from 0.4 mH2O to 200mH2O gauge or absolute.

Process transmitter for measuring vacuum, steam, food, pharmaceutical, oil, gas and other pressure readings necessary for the monitoring and control of bulk production processes. Suitable for deploying in many locations and feeding pressure readings back to the site distributed control system (DCS). Includes HART protocol interface, 10:1 adjustable range scaling and ATEX intrinsic safety as standard, with options for 300degC media temperature and integrated local digital indicator. Available in pressure ranges from 0-400mbar up to 0-600 bar gauge or absolute, and compound ranges from -0.4 to +0.4 bar up to -1 to 10 bar gauge.