Volts Out Transducers - Absolute Pressure

Amplified output absolute pressure transducers with 0-5, 1-5, 0-10, 1-10 volt signal outputs for measuring pressures from absolute zero vacuum.

Low cost ceramic diaphragm pressure transmitter available on a short lead time. Pressure ranges starting from 0-500 mbar up to 0-700 bar gauge or absolute. Electrical signals 4-20mA, 0-5V or 0-10V can be selected. A choice of DIN plug connector or integral cable can be specified for the electical interface.

High precision pressure transmitter with an accuracy of 0.05%FS BSL NLHR and digitally adjustable pressure ranges from 170mb up to 35 bar gauge & absolute

Motorsport pressure transducer with 21mm diameter and and 24mm body length for pressure ranges from 0.5 up to 400 bar gauge or absolute. Available with millivolt and amplified voltage output signals covering the majority of motorsport analogue input signals.

Dual analogue output signal transmitter for simultaneous measurement of media pressure and temperature. Pressure ranges from 100 mbar up to 1000 bar and temperature measuring range from -25 to 100 DegC. To ensure good thermal contact with the media the temperature is measured just behind a flush diaphragm which has sufficient surface area to ensure minimal losses in media temperature at point of measurement.

Stainless steel pressure transmitter with ranges from 100mbar up to 40 bar gauge or absolute with optional accuracy ranging from the standard 0.175% FS up to 0.05% FS. Special options such as ATEX approval, SIL approval and compound ranges are also available.

Three in one electronic pressure switch, digital pressure gauge and pressure sensor with pressure ranges from 100 mbar up to 600 bar (1.5 to 9000 psi) gauge or absolute.