- Instrument Type
- Your Application
- Absolute Reference
- Air/Pneumatics
- Barometric/Atmospheric
- Certificates & Approvals
- Data Logging
- Differential
- Electrical Signal
- Flush Diaphragm
- Gauge Reference
- High Accuracy
- High Frequency Response
- High Range
- High Pressure Transmitters - mA Output
- High Pressure Transducers - V Output
- High Pressure Sensors - mV Output
- Digital High Pressure Sensors
- Readouts for High Pressure Sensors
- High Pressure Gauges
- EEx Approved High Pressure Transmitters
- High Temperature
- Intrinsically Safe
- Leak Testing
- Level Measurement
- Low Ranges
- Measuring Range
- Media Compatibility
- Miniature
- OEM Design
- Overpressure Protection
- PC Interfacing
- Pressure Calibration
- Process Connection
- Testing
- Sensor Technology
- Submersible
- Temperature & Pressure
- Vacuum
- Water Level
- Water Pressure
- Your Industry
- Manufacturers
ATM-T Pressure and Temperature Dual Output Transmitter
;)
Click Images to Enlarge
Dual analogue output signal transmitter for simultaneous measurement of media pressure and temperature. Pressure ranges from 100 mbar up to 1000 bar and temperature measuring range from -25 to 100 DegC. To ensure good thermal contact with the media the temperature is measured just behind a flush diaphragm which has sufficient surface area to ensure minimal losses in media temperature at point of measurement.
Product Parameters
Pressure Ranges: 0-100 mbar up to 0-1000 bar gauge or absolute
Pressure Accuracy: +/- 0.5% FS TSL with optional 0.25% or 0.1%
Temperature Measurement Range: Any from -25 up to 150 DegC
Temperature Accuracy: +/-2 DegC
Output Signal: 4-20mA wire, 0-5V, 0-10V, 0-20mA
Supply Voltage: 15-30Vdc
Electrical Connections: DIN plug, Binder connector, Military connector, PE, PUR or Teflon cable
Pressure Connections: G1/2 male recessed exposed or flush diaphragm
Media Compatbility: All welded stainless steel 316L with Viton pressure connector seal
Dimensions: 24mm diameter, 74mm standard body length , 101mm with cooling fins
Response Time: < 1msec
Special Features: Combined pressure and temperature measurement, zero and span adjustment with removable connector versions
Special Options: Cooling fin option for media temperatures between 100-150 DegC. All Titanium construction, Oxygen service, food compatibility, compound ranges
Product Description
The ATM-T pressure and temperature transmitter combines the measurement of two process parameters in one device saving installation time and space. The sensor measures pressure via an oil filled silicon chip strain gauge capsule. The temperature is measured behind a oil filled isolation diaphragm so there are no temperature probes extending in to the process media. In order to ensure adequate thermal conductivity the design includes an exposed diaphragm so that no media temperature is lost through the pressure port before it reaches the temperature sensing components.
For different applications such as food and drink or Oxygen service a choice of compatible oil fills are available to reduce the risk of contamination if the isolation diaphragm is damaged. For high temperature applications between 100 and 150 degrees Celsius, cooling fins can be specified to reduce the temperature exposed to the electronics housing. An anti-corrosion all Titanium wetted parts version is also possible for use with salt water.
Related Products
Other instrumentation for simultaneous measurement of pressure and temperature
Flush diaphragm pressure transducers and transmitters
Download Product Information
All prices are exclusive of any applicable VAT and delivery charges
£392.00
Site Last Updated: 09/02/12
Glossary - Find explanations for terminology used in specifying and using pressure instruments
Pressure Conversion - Look up conversion factors or select a conversion table for a particular pressure unit
Pressure Measuring Guide - Collection of guidance notes for sourcing, setting up and using pressure measurement equipment
News Articles - Archive of application notes, product releases and technical information
Answers - Search for questions already answered or submit a new question about a pressure measurement topic or product
Pressure Sensor Specification - Select parameters with PSAT to generate a spec for your own use or to submit as an enquiry
Product Finder - Choose multiple product and application types to filter out a suitable product
- 27/03/09 : Measuring vacuum pressure with negative gauge or absolute pressure ranges
- 29/11/08 : What is the difference between a pressure transducer and a transmitter
- 15/09/08 : What is the difference between gauge and absolute pressure measurement
- 17/08/08 : What to consider when selecting a differential pressure sensor
- 10/02/08 : What affects the performance of low pressure sensors
- 19/01/08 : Supply voltage and load resistance considerations for pressure transmitters
- 06/01/08 : Measuring liquid level in a sealed tank with a hydrostatic pressure sensor
- 18/09/07 : Interpreting specifications of pressure sensor accuracy