Home > Your Application > Low Pressure > Low Pressure Sensors - mV Output

IMPLR Low Range Strain Gauge Pressure Transducer

Click Images to Enlarge

Piezo-resistive low range pressure sensor with a 2mV/V or 10mV/V output signal in pressure ranges from 25mb up to 1000mb gauge

Quote | PDF | Spec | Links

The IMP LR pressure transducer has a silicon semiconductor strain gauge sensor element sealed inside an oil filled pressure capsule which produces a high output sensitivity at low pressures.

The IMPLR mV output pressure transducer has a high dynamic response output signal for applications which require a frequency response greater than 1KHz.

Technical Summary

Pressure Range: 25mb up to 1000mb gauge pressure ranges

Accuracy: 0.25% FS BSL NLHR accuracy

Output Signal: 2mV/V or 10 mV/V ratiometric sensitivity

Seals: NBR, Viton or EPDM O ring seals

Electrical Connections: DIN plug, Military style bayonet connector or integral cable with IP65 to IP68 environmental protection

Pressure Connections: All types of BSP, NPT, UNF and metric threads, male and female

Related Products

Millivolt output pressure transducer for measuring above 1 bar

mV output signal pressure transducer for measuring above 1000 bar

More millivolt output pressure sensors

Other low pressure instrumentation

Digital panel meters for strain gauge output pressure transducers

Resources

Definitions for pressure transducer parameters

English, American and SI unit pressure conversion

Download Product Information

IMPLR data sheet

Request a Quote

Pressure Range:
Output Signal:
Electrical Connection:
Length of Cable (metres) if required:
Pressure Connection:
Seals:
Quantity:
Your Name:
Your Email:
Comments:

Home > Your Application > Low Pressure > Low Pressure Sensors - mV Output

Request Info | Ask a Question

Site Last Updated: 12/10/08

Tools

Pressure Conversion

Equals

Resources

Pressure Measurement Glossary - Find explanations of terminology used for specifying and using pressure instruments

Pressure Unit Conversion - Look up conversion factors or select a conversion table for a particular pressure unit

Pressure Sensor Specification - Select parameters with PSAT to generate a spec for your own use or to submit as an enquiry

Contact

Tel: +44 (0)1780 721569

Fax: +44 (0)1780 721586

Email: Enquiries

Help: Request Info

News

15/09/08 : What is the difference between gauge and absolute pressure measurement
25/08/08 : Advantages of using Silicon chip technology for sensing pressure
17/08/08 : What to consider when selecting a differential pressure sensor
11/08/08 : Digital sensor for high precision pressure calibration
05/07/08 : Data logging aggressive fluid level pressures
29/06/08 : Low cost HVAC pressure sensor for clean-room air flow monitoring
21/06/08 : Level sensor for shallow depth measurement
11/05/08 : Low pressure sensor for wet media
19/01/08 : Supply voltage and load resistance considerations for pressure transmitters
06/01/08 : Measuring liquid level in a sealed tank with a hydrostatic pressure sensor
18/11/07 : Determining the hydrostatic pressure range for a tank level sensor
18/09/07 : Interpreting specifications of pressure sensor accuracy
05/05/07 : Measuring vacuum pressure with negative gauge or absolute pressure ranges
22/04/07 : What is the difference between a pressure transducer and a transmitter

RSS

News Feed

Products Feed

©2008 SensorsONE Ltd, All Rights Reserved.