- Instrument Type
- Your Application
- Absolute Reference
- Air/Pneumatics
- Barometric/Atmospheric
- Certificates & Approvals
- Data Logging
- Differential
- Flush Diaphragm
- Gauge Reference
- High Accuracy
- High Frequency Response
- High Range
- High Temperature
- Intrinsically Safe
- Leak Testing
- Level Measurement
- Low Ranges
- Measurement Signal
- Measuring Range
- Media Compatibility
- Miniature
- OEM Design
- Overpressure Protection
- PC Interfacing
- Pressure Calibration
- Process Connection
- Testing
- Sensor Technology
- Submersible
- Temperature & Pressure
- Vacuum
- Water Level
- mV Output Sensors - Water Level
- Volt Output Transducers - Water Level
- 4-20mA Output Transmitters - Water Level
- Loggers - Water Level
- Measuring Tape - Water level
- Gauges - Water Level
- Water Pressure
- Your Industry
- Manufacturers
LMP307 Submersible Level Transmitter
;)
;)
Click Images to Enlarge
Submersible level transmitter for measuring liquid level with a 4-20mA current loop or a 0-10V voltage output plus optional ATEX approval for instrinsically safe use in hazardous areas in ranges from 1mH2O up to 250mH2O.
Product Parameters
Hydrostatic Level Ranges: from 1mH2O to 250mH2O gauge
Accuracy: 0.35% full scale with optional 0.25% or 0.1% IEC60770
Output Signal: 4-20mA or 0-10Vdc, optional ATEX and SIL2
Electrical Connections: Submersible PVC, PUR or FEP cable with IP68 ingress protection
Pressure Connection: Protective self draining nose cone
Media Compatibility: Stainless steel 316Ti body, stainless steel 316L diaphragm, FKM seal gasket plus selected cable jacket
Dimensions: 27mm dia
Weight: 200 g without cable
Special Options: ATEX approved for intrinsic safety, IP66 cable termination enclosure (4-20mA, 2wire only), SIL2 electronics
Product Description
The LMP 307 submersible level transmitter is a general purpose sensor for measuring the level of fresh water or other mildly corrosive liquids.
The LMP-307 submersible level transmitter can be used to measure the water level in reservoirs, lakes, open flow channels & weirs and groundwater level of boreholes.
Relatively low water levels can be measured with the LMP307 submersible level transmitter despite its 27mm diameter. This is possible by incorporating a highly sensitive miniature silicon diaphragm with a very thin isolation membrane back filled with silicone oil.
Delivery Time
3-4 weeks plus dispatch time
Related Products
Accessories for hydrostatic level sensors
Small diameter borehole hydrostatic level transmitter
Millivolt output submersible hydrostatic pressure sensors
Submersible level data loggers
Download Product Information
Site Last Updated: 23/05/12
Glossary - Find explanations for terminology used in specifying and using pressure instruments
Pressure Conversion - Look up conversion factors or select a conversion table for a particular pressure unit
Pressure Measuring Guide - Collection of guidance notes for sourcing, setting up and using pressure measurement equipment
News Articles - Archive of application notes, product releases and technical information
Answers - Search for questions already answered or submit a new question about a pressure measurement topic or product
Pressure Sensor Specification - Select parameters with PSAT to generate a spec for your own use or to submit as an enquiry
Product Finder - Choose multiple product and application types to filter out a suitable product
- 27/03/09 : Measuring vacuum pressure with negative gauge or absolute pressure ranges
- 29/11/08 : What is the difference between a pressure transducer and a transmitter
- 15/09/08 : What is the difference between gauge and absolute pressure measurement
- 17/08/08 : What to consider when selecting a differential pressure sensor
- 10/02/08 : What affects the performance of low pressure sensors
- 19/01/08 : Supply voltage and load resistance considerations for pressure transmitters
- 06/01/08 : Measuring liquid level in a sealed tank with a hydrostatic pressure sensor
- 18/09/07 : Interpreting specifications of pressure sensor accuracy