Home > Your Application > Water Level > Water Level Transmitters with 4-20mA Outputs

LMK306 Ground Water Level Transmitter

Click Images to Enlarge

IP68 sealed hydrostaic level transmitter with a 17.5 mm diameter for lowering into ground water boreholes for environmental monitoring of water level. Available in level ranges from 6 up to 200 metres of water gauge (650 ftH2O gage) with an accuracy of 0.25% full scale BSL.

Quote | PDF | Spec | Links

The LMK 306 ground water level transmitter has a 316Ti stainless steel body with a water tight electrical connection for permanent submersion in freshwater. The sensing element is an Alumina ceramic substrate with thick film strain gauges which has high corrosion resistance properties.

Technical Summary

Liquid Level ranges: from 6 to 200 mH2Og

Accuracy: ±0.25% FS BSL

Output Signal: 4 to 20mA current output

Electrical Connection: PUR, PVC or FEP cable

Pressure Connection: Flush diaphragm or protective cap

Dimensions: 17 mm diameter

Weight: 100 g

Special Options: Aluminium termination box for vented cable with over voltage protection electronics and/or PT100 transmitter

Related Products

Accessories for level measurement sensors

Other groundwater level transmitters

Submersible pressure sensors

Resources

Look up an explanation for a pressure sensor parameter

Find conversion factors for hydrostatic pressure units

Read explanation for hydrostatic pressure

Download Product Information

LMK306 data sheet

Cable Termination Box data sheet

LMK306 operating manual

Request a Quote

Hydrostatic Level Range:
Cable Jacket:
Length of Cable (metres):
Cable Junction Box:
Quantity:
Your Name:
Your Email:
Comments:

Home > Your Application > Water Level > Water Level Transmitters with 4-20mA Outputs

Request Info | Ask a Question

Site Last Updated: 07/10/08

Tools

Pressure Conversion

Equals

Resources

Pressure Measurement Glossary - Find explanations of terminology used for specifying and using pressure instruments

Pressure Unit Conversion - Look up conversion factors or select a conversion table for a particular pressure unit

Pressure Sensor Specification - Select parameters with PSAT to generate a spec for your own use or to submit as an enquiry

Contact

Tel: +44 (0)1780 721569

Fax: +44 (0)1780 721586

Email: Enquiries

Help: Request Info

News

15/09/08 : What is the difference between gauge and absolute pressure measurement
25/08/08 : Advantages of using Silicon chip technology for sensing pressure
17/08/08 : What to consider when selecting a differential pressure sensor
11/08/08 : Digital sensor for high precision pressure calibration
05/07/08 : Data logging aggressive fluid level pressures
29/06/08 : Low cost HVAC pressure sensor for clean-room air flow monitoring
21/06/08 : Level sensor for shallow depth measurement
11/05/08 : Low pressure sensor for wet media
19/01/08 : Supply voltage and load resistance considerations for pressure transmitters
06/01/08 : Measuring liquid level in a sealed tank with a hydrostatic pressure sensor
18/11/07 : Determining the hydrostatic pressure range for a tank level sensor
18/09/07 : Interpreting specifications of pressure sensor accuracy
05/05/07 : Measuring vacuum pressure with negative gauge or absolute pressure ranges
22/04/07 : What is the difference between a pressure transducer and a transmitter

RSS

News Feed

Products Feed

©2008 SensorsONE Ltd, All Rights Reserved.