E-Mail | Sitemap

Home > Your Application > Intrinsically Safe > Pressure Gauges with Intrinsic Safety Approval

ECO1 Low Cost Digital Pressure Gauge

Click Images to Enlarge

Economically priced digital pressure gauge available in either a -1 to 30 bar or a 300 bar pressure range which is accurate to 1% of range with optional intrinsic safety certification.

Quote | PDF | Spec | Links | Buy

The ECO 1 digital pressure gauge is compact and low cost for many general purpose pressure checking applications which require industrial grade performance on a small budget.

The pressure is displayed bar pressure units from a 4 digit LCD display and the zero tare, peak and valley hold and auto off setting are all accessed via the 2 push buttons located just below the LCD display.

The ECO1 digital pressure gauge is powered by a small 3 volt CR2430 battery which lasts up to 1000 hours in continuous use. As standard a 1/4 inch BSP male swivel joint pressure adaptor to allow the digital pressure gauge to be orientated for optimum viewing of the display.

Technical Summary

Pressure Ranges: -1 to 30 bar or 300 bar sealed gauge

Accuracy: ±1% full scale max

Power Supply: 3 volt CR2430 battery

Display: 4 digit LCD

Environmental Protection: IP65

Dimensions: 59 x 95 x 32 mm

Weight: 125 g

Pressure Connection: 1/4 inch BSP male with swivel joint

Special Options: ATEX certification to II 1 G EEx ia IIC T6 or T5, traceable or UKAS cal certs

Related Products

Calibration hand-pumps for precise setting of test pressures

Higher accuracy digital pressure gauges

Do you need a pressure range below 3 bar (45 psi)?

Want to measure above 300 bar (4500 psi)?

Resources

Descriptions for pressure measurement key terms

Convert pressure into English, American or SI units

Download Product Information

ECO1 data sheet

Test Pump data sheet

ECO1 operation manual

ECO1 Ei operating manual

Request a Quote

Pressure Range:
ATEX IS Approval:
Protective rubber boot cover (not ATEX approved):
Soft carrying case (not ATEX approved):
Spare battery:
Calibration certificate:
Calibration hand pump kit:
Quantity:
Your Name:
Your Email:
Comments:

Home > Your Application > Intrinsically Safe > Pressure Gauges with Intrinsic Safety Approval

Request Info | Ask a Question | Call Request

Site Last Updated: 06/07/08

Tools

Pressure Conversion

Equals

Resources

Pressure Measurement Glossary - Find explanations of terminology used for specifying and using pressure instruments

Pressure Unit Conversion - Look up conversion factors or select a conversion table for a particular pressure unit

Pressure Sensor Specification - Select parameters with PSAT to generate a spec for your own use or to submit as an enquiry

Contact

Tel: +44 (0)1780 721569

Fax: +44 (0)1780 721586

Email: Enquiries

Help: Request Info

News

05/07/08 : Data logging aggressive fluid level pressures
29/06/08 : Low cost HVAC pressure sensor for clean-room air flow monitoring
21/06/08 : Level sensor for shallow depth measurement
11/05/08 : Low pressure sensor for wet media
19/01/08 : Supply voltage and load resistance considerations for pressure transmitters
06/01/08 : Measuring liquid level in a sealed tank with a hydrostatic pressure sensor
18/11/07 : Determining the hydrostatic pressure range for a tank level sensor
18/09/07 : Interpreting specifications of pressure sensor accuracy
05/05/07 : Measuring vacuum pressure with negative gauge or absolute pressure ranges
22/04/07 : What is the difference between a pressure transducer and a transmitter
20/03/07 : What is the difference between gauge and absolute pressure measurement
17/03/07 : What to consider when selecting a differential pressure sensor
15/03/07 : Digital sensor for high precision pressure calibration

RSS

News Feed

Products Feed

©2008 SensorsONE Ltd, All Rights Reserved.

Powered by interdesigns