Current Output Submersible Pressure Transmitters

Current loop output signal pressure transmitters for submersible use in environmental monitoring, process industry tank contents, water utilities and landfill sites.

Submersible level transmitter for measuring liquid level with a 4-20mA current loop or a 0-10V voltage output plus optional ATEX approval for instrinsically safe use in hazardous areas in ranges from 1mH2O up to 250mH2O.

Submersible waste water level sensor with optional intrinsic safety certification for monitoring the level of sewage and effluent in water treatment plants. Available in level ranges from 6 up to 250 meters of water gauge.

IP68 mid range pressure transmitter for measuring the level of highly contaminated and agressive liquid media with a body made from PVC or PVDF. Hydrostatic ranges from 4 mWC up to 100 mWC

Submersible stainless steel pressure transmitter ideal for geotechnical surveying with a 19mm diameter for measuring hydrostatic water level in bore-holes. This small diameter level sensor has level ranges from 1 up to 250 metres water column and a 4-20mA current loop output signal.

IP68 sealed hydrostaic level transmitter with a 17.5 mm diameter for lowering into ground water boreholes for environmental monitoring of water level. Available in level ranges from 6 up to 200 metres of water gauge (650 ftH2O gage) with an accuracy of 0.25% full scale BSL.

All Titanium submersible pressure transmitter for measuring the hydrostatic level of leachate, brackish water or sea water. Ranges from 1 metre up to 250 metres of water column with option for ATEX approval for use zone 0 hazardous areas such as landfill sites.

Immersible low pressure sensor for measuring shallow liquid level with a rangeable 4-20mA current loop or high level voltage output signal in level ranges from 80mmH20 up to 160mH2O

Absolute referenced hydrostatic depth sensor with an IP68 sealed electrical interface, stainless steel 316L or Duplex housing and a mV, amplified voltage or current output. Available in depth ranges from 5 to 90 mWG.

Robust cable junction box for terminating vented electrical cable from a 2 wire submersible hydrostatic level transmitter. The inside of the IP66 sealed box is vented to the ambient outside air via a PTFE filter to ensure the level sensor is properly vented to compensate for atmospheric pressure.

Submersible Low Range waste water level transmitter with intrinsically safe option for monitoring the level of sewage and effluent in water treatment plants. Available in level ranges from 0.4 up to 4 meters of water gauge.

IP68 low range pressure transmitter for measuring the level of highly contaminated and agressive liquid media with a body made from PVC or PVDF. Hydrostatic level ranges from 0.4 up to 4 metres of water column.