- Instrument Type
- 4-20mA Transmitters
- 0-5, 10V Transducers
- mV/V Sensors
- Digital Sensors
- Absolute Sensors
- ATEX Transmitters
- Calibration Pumps
- Calibrators
- Compound Ranges
- Digital Gauges
- Digital Manometers
- Digital Readouts
- Digital Indicators
- Alarm Relay Output Process Indicators
- Multiple Channel Digital Readouts
- Local Plug-On Digital Displays
- Digital Controllers
- Strain Gauge Input Digital Displays with Alarm Relay Outputs
- RS232 Digital Panel Meters
- RS485 Panel Indicators
- DP Transmitters
- Indicators - Pressure
- Liquid Level Sensors
- Loggers - Pressure
- Loggers - Liquid Level
- Suction Pressure Sensors
- Switches
- Accessories
- Your Application
- Your Industry
- Manufacturers
SRP94 Large LED Process Display Panel Mount Indicator
;)
Click Images to Enlarge
Four digit reading digital indicator for monitoring the signal from current or voltage output sensors with setable alarms for switching equipment on/off at predetermined levels such as fans, pumps or valve.
Product Parameters
Display: Red LED with 4 digits
Input Signal: Single channel 4-20mA, 0-20mA, 0-5V, 1-5V, 0-10V or 2-10V
Input Accuracy: 0.25% FS + 1 digit
Alarms: Optional 2 or 4 relays or open collector
Configuration: Front panel keypad
Power Supply: 85 to 260 Vac/dc, 19 to 50 Vdc or 16 to35Vac
Environmental Protection: IP40 front panel, IP20 rear panel
Dimensions: 1/8DIN front fascia, 96 x 48 x 100 mm
Special Features: RS485, Modbus RTU digital communications, analogue output configuragble from 0-24mA
Special Options: IP65 front panel frame
Product Description
AC mains or low ac/dc voltage powered digital indicator with inputs for 4 to 20mA, 0 to 20mA, 0 to 5V, 1 to 5V, 0 to 10V or 2 to 10V. The SRP-94 is fullly configurable for any type sensor with an analogue output and the large LED digital display can be scaled to indicate any engineering unit withon the resolution range of 4 digits.
For switching on and off control equipment the SRP 94 is equipped with up to 4 relay alarms for mains high voltage switching or solid state open collector type switching for lower rated dc voltage circuits.
As standard the SRP94 is fitted with a RS485 interface to allow the transmission of data back to a digital process control system. There is also the option for a current loop output, rangeable from 0-24mA to output an analogue signal proportional to the measurement reading.
Related Products
Multiple input channel indicators
Pressure transmitters to interface with this indicator
Voltage Pressure transducers for combining with this readout
Download Product Information
Site Last Updated: 23/05/12
Glossary - Find explanations for terminology used in specifying and using pressure instruments
Pressure Conversion - Look up conversion factors or select a conversion table for a particular pressure unit
Pressure Measuring Guide - Collection of guidance notes for sourcing, setting up and using pressure measurement equipment
News Articles - Archive of application notes, product releases and technical information
Answers - Search for questions already answered or submit a new question about a pressure measurement topic or product
Pressure Sensor Specification - Select parameters with PSAT to generate a spec for your own use or to submit as an enquiry
Product Finder - Choose multiple product and application types to filter out a suitable product
- 27/03/09 : Measuring vacuum pressure with negative gauge or absolute pressure ranges
- 29/11/08 : What is the difference between a pressure transducer and a transmitter
- 15/09/08 : What is the difference between gauge and absolute pressure measurement
- 17/08/08 : What to consider when selecting a differential pressure sensor
- 10/02/08 : What affects the performance of low pressure sensors
- 19/01/08 : Supply voltage and load resistance considerations for pressure transmitters
- 06/01/08 : Measuring liquid level in a sealed tank with a hydrostatic pressure sensor
- 18/09/07 : Interpreting specifications of pressure sensor accuracy