Ratiometric 0.5 to 4.5 Volt Output Pressure Transducers

Ratiometric voltage output pressure transducer with a 0.5 to 4.5 volt signal which is proportional to the nominal input supply voltage of 5 volt dc.  Primarily used in automotive and motorsport appplications this type of amplified output pressure sensor can be used in any application requiring high output signal with low input supply voltage.

Versatile low price pressure transducer with a wide selection of electrical and mechanical options to enable the customisation of the sensor to suit most industrial, automation and OEM design installations. A dry cell ceramic strain gauge sensing diaphragm provides a high corrosion resistance to many types of harsh chemical media commonly found in automated industrial processes and machinary monitoring applications.

Low cost sensor for measuring small pressure ranges from 0-50 mbar (10 inH2O) up to 0-1000 mbarg (15 psi) of liquids or gases. Choose from a full list of outputs, electrical, connectors and accuracy specs to meet your OEM custom product integration requirements.

Motorsport pressure transducer with 21mm diameter and and 24mm body length for pressure ranges from 0.5 up to 400 bar gauge or absolute. Available with millivolt and amplified voltage output signals covering the majority of motorsport analogue input signals.

Miniature size 1/2 inch diameter stainlesss steel pressure sensor with either a strain gauge millivolt output or an amplified 0.5 to 4.5 Vdc output. Pressure ranges start from 10 bar (150psi) up to 400 bar (6000 psi). Thread sizes include M5, M6, M8, M10, Dash3 or 1/8NPT.

Half in inch diameter sensor for measuring both temperature and pressure in one device. Measure pressure in ranges from 0-150 psi up to 0-6000 psi. Select a NTC thermistor, PT100 or PT1000 temperature measurement device to integrate alongside the pressure sensing device.

Economical IP68 protected sensor with stainless steel 316L housing and Ceramic strain gauge sensing diaphragm for measuring liquid depth pressure or the pressure in a submerged pipe or vessel. Measure hydrostatic pressure from from 0 to 10 mWC (33 ftWC) up to 0 to 100 mWC (330 ftWc) and convert reading to a millivolt, current or voltage signal output. The Ceramic diaphragm has a high chemical resistance to media such as leachate and seawater, and the housing can be upgraded to Duplex stainless steel if necessary for extra material protection. A PUR coated cable is fitted as standard, but for additional chemical protection an FEP coated cable can be supplied.