E-Mail | Sitemap

Home > Instrument Type > Pressure Transducers (mV) > Strain Gauge Pressure Sensors for Monitoring Low Pressures

IMP Ceramic Strain Gauge Pressure Transducer

Click Images to Enlarge

Piezo-resistive pressure transducer with a 2mV/V or 10mV/V output signal in pressure ranges from 0.25 bar up to 700 bar gauge or absolute.

Quote | PDF | Spec | Links

The IMP millivolt output pressure transducer includes a ceramic thick film strain gauge sensor element which has very high corrosion tolerance when used with aggressive media.

The IMP ceramic strain gauge pressure transducer has a high dynamic response output signal for applications which require a frequency response greater than 1KHz

Technical Summary

Pressure Ranges: 0.25 bar up to 700 bar gauge or absolute plus suction and compound ranges

Accuracy: 0.25% FS BSL NLHR

Output Signals: 2mV/V or 10mV/V (amplified ratiometric) sensitivity

Electrical Connections: Integral cable gland, DIN plug and other connector types with IP65-68 environmental protection

Pressure Connections: All types of BSP, NPT, UNF and metric threads male and female

Wetted Parts: Stainless steel pressure connector, Ceramic Alumina diaphragm and NBR, Viton or EPDM internal seals

Special Options: Duplex stainless steel pressure port for seawater compatibility, 150 DegC cooling element

Related Products

Millivolt output pressure transducers for measuring above 700 bar

mV output signal pressure transducer with ranges below 250 mbar g

More strain gauge output pressure sensors

Digital panel indicators for strain gauge output pressure transducers

Resources

Explanations for pressure transducer specification parameters

English, American and SI pressure unit converter

Download Product Information

Request a Quote

Pressure Range:
Output Signal:
Thermal Zero Sensitivity:
Electrical Connection:
Length of Cable (metres) if required:
Pressure Connection:
Seals:
Quantity:
Your Name:
Your Email:
Comments:

Home > Instrument Type > Pressure Transducers (mV) > Strain Gauge Pressure Sensors for Monitoring Low Pressures

Request Info | Ask a Question | Call Request

Site Last Updated: 06/07/08

Tools

Pressure Conversion

Equals

Resources

Pressure Measurement Glossary - Find explanations of terminology used for specifying and using pressure instruments

Pressure Unit Conversion - Look up conversion factors or select a conversion table for a particular pressure unit

Pressure Sensor Specification - Select parameters with PSAT to generate a spec for your own use or to submit as an enquiry

Contact

Tel: +44 (0)1780 721569

Fax: +44 (0)1780 721586

Email: Enquiries

Help: Request Info

News

05/07/08 : Data logging aggressive fluid level pressures
29/06/08 : Low cost HVAC pressure sensor for clean-room air flow monitoring
21/06/08 : Level sensor for shallow depth measurement
11/05/08 : Low pressure sensor for wet media
19/01/08 : Supply voltage and load resistance considerations for pressure transmitters
06/01/08 : Measuring liquid level in a sealed tank with a hydrostatic pressure sensor
18/11/07 : Determining the hydrostatic pressure range for a tank level sensor
18/09/07 : Interpreting specifications of pressure sensor accuracy
05/05/07 : Measuring vacuum pressure with negative gauge or absolute pressure ranges
22/04/07 : What is the difference between a pressure transducer and a transmitter
20/03/07 : What is the difference between gauge and absolute pressure measurement
17/03/07 : What to consider when selecting a differential pressure sensor
15/03/07 : Digital sensor for high precision pressure calibration

RSS

News Feed

Products Feed

©2008 SensorsONE Ltd, All Rights Reserved.

Powered by interdesigns