- Instrument Type
- 4-20mA Transmitters
- 0-5, 10V Transducers
- mV/V Sensors
- General Purpose Millivolt Output Pressure Transducer
- OEM Millivolt Output Pressure Transducers
- mV Output Transducers for High Pressure Testing
- Strain Gauge Pressure Sensors for Monitoring Low Pressures
- Water Resistant Pressure Sensors with Strain Gauge Output
- Exposed Diaphragm Pressure Sensors with Millivolt Output
- Small Size Pressure Transducers with Ratiometric mV Output
- Digital Sensors
- Absolute Sensors
- ATEX Transmitters
- Calibration Pumps
- Calibrators
- Compound Ranges
- Digital Gauges
- Digital Manometers
- Digital Readouts
- DP Transmitters
- Indicators - Pressure
- Liquid Level Sensors
- Loggers - Pressure
- Loggers - Liquid Level
- Suction Pressure Sensors
- Switches
- Accessories
- Your Application
- Your Industry
- Manufacturers
Exposed Diaphragm Pressure Sensors with Millivolt Output
Exposed flush face diaphragm pressure sensors with millivolt output signals for measuring the pressures of high viscosity liquids or where the internal volume of the pressure connection needs to be eliminated.
Water resistant pressure sensor for measuring hydrostatic pressures in the range of 0-0.5 mWC up to 0-100 mWC. An all stainless steel 316L construction with Viton O rings seals and a choice of PUR, PVC or FEP vented cabling. The IMSL is used for measuring groundwater, aquifer, reservoir and borehole water level. The internal silicon strain gauge sensor provides a stable water level reading accurate to 0.1% of span linearity with low hysteresis and repeatability errors.
Passive compensated pressure transducer with a four arm semiconductor Wheatstone bridge circuit which produces a 100 millivolt with a 10 volt excitation. Pressure ranges from 0-100mbar up to 0-1000bar gauge or absolute. The silicon sensing chip is totally isolated from the media by an oil filled stainless steel 316L capsule with isolation membrane. This sensor is ideally suited for high frequency response applications since the output is only limited by the natural response of the silicon sensing capsule.
Flush diaphragm piezo-resistive pressure sensor for food processing and plastic injection moulding applications with a millivolt output signal in pressure ranges from 10 up to 1000 barg.
Site Last Updated: 09/02/12
Glossary - Find explanations for terminology used in specifying and using pressure instruments
Pressure Conversion - Look up conversion factors or select a conversion table for a particular pressure unit
Pressure Measuring Guide - Collection of guidance notes for sourcing, setting up and using pressure measurement equipment
News Articles - Archive of application notes, product releases and technical information
Answers - Search for questions already answered or submit a new question about a pressure measurement topic or product
Pressure Sensor Specification - Select parameters with PSAT to generate a spec for your own use or to submit as an enquiry
Product Finder - Choose multiple product and application types to filter out a suitable product
- 27/03/09 : Measuring vacuum pressure with negative gauge or absolute pressure ranges
- 29/11/08 : What is the difference between a pressure transducer and a transmitter
- 15/09/08 : What is the difference between gauge and absolute pressure measurement
- 17/08/08 : What to consider when selecting a differential pressure sensor
- 10/02/08 : What affects the performance of low pressure sensors
- 19/01/08 : Supply voltage and load resistance considerations for pressure transmitters
- 06/01/08 : Measuring liquid level in a sealed tank with a hydrostatic pressure sensor
- 18/09/07 : Interpreting specifications of pressure sensor accuracy