|
Level Tape 100 for Calibrating Water Level Sensors
Click Images to Enlarge
The level tape 100 system is used for determine the depth to water level and the bottom of the well graduated in metres by millimetres or feet by 0.01 feet. The reel unit produces an audible buzz when the probe hits the water and the tape goes slack when the probe reaches the bottom of the well. The tape can be supplied graduated in either metric or imperial units and is made from Kevlar reinforced polyethylene with stainless steel conductors for the probe connections. The probe is constructed from stainless steel and Teflon and has a diameter of 16mm (0.63 inches). It is sealed to IP68 and pressure tested to the full length of the tape. When the probe touches the water it will send a signal to the reel electronic unit which sounds an audible buzzer and lights an LED indicator. After a period of time the buzzer will automatically shut off.The indicating circuit is powered by a 9 volt battery. The reel consists of either a rugged nylon (<= 150m/500ft) or a aluminium (> 150m/500ft) spool mounted on a steel frame with a combined handle, reel lock and casing hanger.
Technical Summary Tape Type: Kevlar reinforced PE white tape with black print Tape Lengths: from 30m (200ft) to 600m (2000ft) Reel Diameter: 34 cm (13.5inches) Reel Weight: 2 kg (5lb) Tape Weight: 0.5 kg (1lb) per 30m (100ft) Tape Tensile Strength: 45 kg (100 lbs) Power Supply: 9 volt battery Special Options: Padded nylon carrying bag Related Products Liquid level measurement instrumentation Level loggers for recording water depth Submersible hydrostatic pressure sensors Resources Conversion table for mH20 into ftH20, bar, psi or inHg Download Product Information
Request a Quote
Home
> Instrument Type > Liquid Level Sensors > Manually Operated Water Depth Gauges |
Site Last Updated: 20/07/08
Tools
Resources
Pressure Measurement Glossary - Find explanations of terminology used for specifying and using pressure instruments
Contact
News
RSS
|
;)
;)
;)
;)
