Accessories for liquid level measurement sensors

Find an associated product for including in the installation or calibration of hydrostatic pressure sensors.  Determine water depth with a manual tape system or protect vented references with a dry vented junction box.

Battery powered data logger for recording atmospheric pressure with an accuracy of ±0.1% full scale. A temperature sensor is also included with an accuracy of ±0.1 DegC.

Robust cable junction box for terminating vented electrical cable from a 2 wire submersible hydrostatic level transmitter. The inside of the IP66 sealed box is vented to the ambient outside air via a PTFE filter to ensure the level sensor is properly vented to compensate for atmospheric pressure.

The level tape 100 system is used for determine the depth to water level and the bottom of the well graduated in metres by millimetres or feet by 0.01 feet. The reel unit produces an audible buzz when the probe hits the water and the tape goes slack when the probe reaches the bottom of the well.

Level tape 200 system is used for manually measuring the water depth of a well or borehole or for calibrating the water level datum when installing a water level sensor. Manufactured and tested to ASME (American Society of Mechanical Engineers) requirements the water level tape 200 incorporates enhanced features such as heavy duty polyethylene jacketed tape with black print on yellow background for easy reading, sensitivity adjustment via touch pad control for filtering out false readings due to running water, tape tensile strength of 300lb and an included carrying bag