Thick Film Strain Gauge Ceramic Fluid Level Sensors

Ceramic sensors with ink printed thick film strain gauges for measuring medium range fluid levels.  The smaller diameter of this technology makes it useful for down hole applications where a narrow bore size is required.  Thick film strain gauge technology is relatively low cost and resistant to most fluids found in factories and plants.

Submersible waste water level sensor with optional intrinsic safety certification for monitoring the level of sewage and effluent in water treatment plants. Available in level ranges from 4 up to 250 meters of water gauge.

Submersible Low Range waste water level transmitter with intrinsically safe option for monitoring the level of sewage and effluent in water treatment plants. Available in level ranges from 0.4 up to 100 meters of water gauge.

Hydrostatic level sensor with an IP68 sealed electrical connection, stainless steel 316L, Duplex or PVC construction and a passive millivolt strain gauge output signal. Available in level ranges from 10 to 100 mWG gauge or absolute.

IP68 sealed hydrostatic level transmitter with a 17mm diameter for lowering into ground water boreholes for environmental monitoring of water level. Available in level ranges from 6 up to 200 metres of water gauge (650 ftH2O gage) with an accuracy of 0.5% full scale.

Level pressure sensor with semi-flush ceramic diaphragm and stainless steel or PVDF wetted parts for aggressive corrosive media in ranges from 4mH2O up to 600mH2O gauge or absolute.

Economical IP68 protected sensor with stainless steel 316L housing and Ceramic strain gauge sensing diaphragm for measuring liquid depth pressure or the pressure in a submerged pipe or vessel. Measure hydrostatic pressure from from 0 to 10 mWC (33 ftWC) up to 0 to 100 mWC (330 ftWc) and convert reading to a millivolt, current or voltage signal output. The Ceramic diaphragm has a high chemical resistance to media such as leachate and seawater, and the housing can be upgraded to Duplex stainless steel if necessary for extra material protection. A PUR coated cable is fitted as standard, but for additional chemical protection an FEP coated cable can be supplied.

IP68 mid range pressure transmitter for measuring the level of highly contaminated and agressive liquid media with a body made from PVC. Hydrostatic ranges from 4 mWC up to 100 mWC

SDI-12 protocol transducer for sensing water depth level and temperature in seawater, brackish water, tidal water, saline water or leachate. The digital interface conforms to the requirements of the SDI12 support group and can be used with environment monitoring equipment which supports the SDI12 digital communications interface. A high corrosion resistant ceramic diaphragm is fitted a standard and stainless steel 316L, Duplex or Marine Bronze housing materials can be chosen to suit the application requirements. Measure salt water depth in the ranges starting from 0-10 metres up to 0-100 metres, including absolute non-vented ranges from 1.5 bar up to 10 bar absolute.

Analogue output sensor for immersing in seawater to determine depth or change in water level by measuring hydrostatic pressure. This sea depth probe has a Marine bronze housing and Ceramic diaphragm for protection from saltwater corrosion. Select fixed ranges from 10 metres (33 feet) up to 100 metres (328 feet) depth in a number of analogue output configurations including low voltage strain gauge, amplified voltage and current loop output. Also suitable for use in brackish and inland tidal water or any other application where there is the risk of corrosion form a saline liquid.