All Welded Wetted Parts

Pressure sensors and gauges which have an all metal construction where the diaphragm and pressure connector is welded together for a high integrity leak tight seal compatible with most corrosive fluids and gases.

Miniature size 1/2 inch diameter stainlesss steel pressure sensor with either a strain gauge millivolt output or an amplified 0.5 to 4.5 Vdc output. Pressure ranges start from 10 bar (150psi) up to 400 bar (6000 psi). Thread sizes include M5, M6, M8, M10, Dash3 or 1/8NPT.

Half in inch diameter sensor for measuring both temperature and pressure in one device. Measure pressure in ranges from 0-150 psi up to 0-6000 psi. Select a NTC thermistor, PT100 or PT1000 temperature measurement device to integrate alongside the pressure sensing device.

Dual analogue output signal transmitter for simultaneous measurement of media pressure and temperature. Pressure ranges from 100 mbar up to 1000 bar and temperature measuring range from -25 to 100 DegC. To ensure good thermal contact with the media the temperature is measured just behind a flush diaphragm which has sufficient surface area to ensure minimal losses in media temperature at point of measurement.

All stainless steel 316L hygienic digital display pressure gauge for measuring low range pressures with ranges from 0-100 mbar up to 0-40 bar gauge or absolute, including vacuum range 0 to -1 bar. This sanitary pressure gauge includes open diaphragm process fittings for threaded BSP, dairy pipe and Tri-clamp style process connections.

Battery powered pressure gauge with all welded wetted parts with exposed diaphragm for measuring high range pressures of viscous/pasty fluids or media which requires the use of hygienic equipment. Measure pressure ranges from 0-60 bar (900 psi) to 0-400 bar (6000 psi) gauge or absolute. Supplied with a G1/2 or a G1 male flush diaphragm process fitting for thread mounting.

Screw-in pressure transmitter with flush stainless steel 316L diaphragm for measuring pressures of fluids with very high viscosity from 900 psi up to 6000 psi gauge or absolute. Options available for high temperatures up to 300 deg C and intrinsic safety.

Current output pressure transducer for measurement ranges from 0 to 2000 (30000 psi) range up to a maximum range of 6000 bar (90000 psi). All welded wetted parts and ATEX approved electronics for use in flammable gas or dust environments. Primarily used in hydraulic systems, waterjet torching and high pressure petrochemical applications. Accurate to 0.5% full scale output with adjustable zero and span trim via accessible potentiometers.

Sanitary pressure sensor wth exposed diaphragm with no crevices for high temperatures up to 300 Degrees Celsius in ranges from 100mb up to 40 bar gauge or absolute

Based around a high integrity all welded thin film strain gauge sensing element, this high range pressure transducer is designed for measuring hydraulic pressures up to 2200 bar (~32,000 psi) on equipment such as hydraulic presses, injection moulding machines and other high range monitoring and control systems.

Measure vacuum, positive gauge and absolute pressures from -1 bar (-15psi) up to 40 bar (600psi) with this all in one electronic switch, gauge and sensor. Designed specifically for use in the food, drink and biomedical industry for measuring process pressures and vessel contents. Choose dairy pipe or clamp type sanitary process fittings and select a food grade oil fill as the diaphragm isolation fluid. For pharmaceutical installations requiring hazardous dust protection the instrument includes the option for ATEX intrinsic safety.

Piezo-resistive pressure sensor with a millivolt output direct from a four arm wheatstone bridge strain gauge circuit in pressure ranges from 10 up to 1000 bar gauge.

High pressure transducer for pressure testing applications with 4-20mA current loop or amplified voltage output signal available in pressure ranges from 50 up to 1000 bar gauge to with a measurement accuracy of 0.1%.

All stainless steel compact temperature transmitter with integrated Platinum resistance thermometer (PT100) for installing on machines, industrial process control, mobile hydraulics, HVAC or environmental monitoring equipment. Measure any temperature scaling between -50 to 150 degC and specify a voltage, current or RTD output.

Rangeable Pressure Transmitter with an all stainless steel construction with LCD digital readout display and optional HART communications. Specifically designed for use in food, dairy, pharmaceutical or biotechnology applications where ultra clean crevice free flush diaphragms are required.

Process transmitter for measuring vacuum, steam, food, pharmaceutical, oil, gas and other pressure readings necessary for the monitoring and control of bulk production processes. Suitable for deploying in many locations and feeding pressure readings back to the site distributed control system (DCS). Includes HART protocol interface, 10:1 adjustable range scaling and ATEX intrinsic safety as standard, with options for 300degC media temperature and integrated local digital indicator. Available in pressure ranges from 0-400mbar up to 0-600 bar gauge or absolute, and compound ranges from -0.4 to +0.4 bar up to -1 to 10 bar gauge.

ATEX approved hydraulic pressure sensor for instrinsically safe use in hazardous areas with a 4-20mA current loop output signal in pressure ranges from 50 up to 1000 bar gauge