Clean crevice free open faced diaphragm pressure sensors and gauges for use in food, beverage, biotech or pharmaceutical applications. Designed to prevent the build up of contaminants and aid easy cleaning of all materials exposed to the gas or fluid. In case of isolation diaphragm failure all fluid filled sensors are filled with a food grade oil such as olive oil or peanut oil so that any contamination is harmless.
Sanitary pressure sensor wth exposed diaphragm with no crevices for high temperatures up to 300 Degrees Celsius in ranges from 100mb up to 40 bar gauge or absolute
Screw-in pressure transmitter with flush stainless steel 316L diaphragm for measuring pressures of fluids with very high viscosity from 900 psi up to 6000 psi gauge or absolute. Options available for high temperatures up to 300 deg C and intrinsic safety.
Highly accurate digitally compensated pressure transducer with G1/2 male flush pressure port. Designed for use on viscous media or where a flush face is required for easier cleaning when used with food, drink or hazardous substances such as Oxygen. Select pressure ranges as low as 1 bar or as high as 1000 bar. Standard digital output is RS485 which can be converted to RS232 or USB via optional converter cables.
Dual analogue output signal transmitter for simultaneous measurement of media pressure and temperature. Pressure ranges from 100 mbar up to 1000 bar and temperature measuring range from -25 to 100 DegC. To ensure good thermal contact with the media the temperature is measured just behind a flush diaphragm which has sufficient surface area to ensure minimal losses in media temperature at point of measurement.
Battery powered pressure gauge with all welded wetted parts with exposed diaphragm for measuring high range pressures of viscous/pasty fluids or media which requires the use of hygienic equipment. Measure pressure ranges from 0-60 bar (900 psi) to 0-400 bar (6000 psi) gauge or absolute. Supplied with a G1/2 or a G1 male flush diaphragm process fitting for thread mounting.
Robust industrial self powered logger for recording up to 130,000 pressure values with a minimum logging interval time of 2 seconds. Select a pressure from 0 to 100 mbar to as high as 0 to 1000 bar gauge or absolute.
Combined sensor, electronic switch and digital gauge with an all welded stainless steel flush face diaphragm for measuring the pressure of high viscosity liquids or gases and fluid requiring a high level of cleanliness. Choose measuring ranges from 60 bar up to 400 bar with gauge or absolute reference. Select different sizes of BSP thread for a screw-in type pressure fitting. The integrated digital readout can be configured to read in any pressure units and process pressure limits can be set for controlling external equipment.
tel: +44 (0)844 800 9440
©2013 SensorsONE Ltd, all rights reserved.