EPIH Ultra Miniature Cylindrical Pressure Transducer

Click Images to Enlarge

Very small diameter strain gauge pressure sensor with a round body for inserting into small holes and bonding with epoxy or elastomer adhesive. Diameters range from 1.27 up to 2.36 mm with pressure ranges from 0.35 bar up to 20 bar gauge, absolute or sealed gauge. Used for pressure profiling aerodynamic or hydrodynamic surfaces.

Price | Del | PDF | Links | Buy

Product Parameters

Pressure Ranges: from 0.35 up to 20 bar gauge, absolute or sealed gauge

Output Signal: 75mV at 5Vdc excitation from 3.5bar ranges, 12mV 0.35bar, 24mV 0.7bar, 36mV 1bar, 60mV 1.5 bar

Supply Voltage: 5Vdc standard, ratiometric, 1, 2, 3, 4 or 10V can be specified

Input Impedance: 750ohms typical (1500ohms for 10Vdc excitation)

Output Impedance: 750 ohms

Diameter: Select from 1.27 to 2.36mm

Length: from 6.4 to 11.4mm excluding vent tube

Frequency Response: 25 to 340 kHz derived from 20% of lowest to highest pressure range natural frequency

Operating Temperature Range: -40 degC to 120 DegC

Product Description

The EPIH ultra miniature cylindrical pressure transducer has a minute exposed silicon chip strain gauge diaphragm which makes it possible to produce extremely small diameter pressure sensors and achieve very high frequency response to the dynamic changes in pressure.

The basic construction consists of a silicon chip set flush on the front end of a metal body with epoxy, wire connections plus the vented reference (gauge ranges only) are made on the reverse of the sensing diaphragm and exit via the back end of the metal tube.

Delivery Time

6-8 weeks plus dispatch time

Related Products

Other miniature pressure transducers

Millivolt output pressure transducers

Silicon diaphragm pressure transducers

Resources

Look up an explanation for a pressure tranducer parameter

Calculate a pressure value in different units

Drilldown your selection of miniature sensors by grouping categories

Search webpages for miniature sensor related info

Download Product Information

EPIH data sheet

Quote/Buy

All prices are exclusive of any applicable VAT and delivery charges

�850.65

Pressure Range:
Body:
Length of unshielded wires:
Supply Voltage:
Temperature Compensation:
RTV protective coating on diaphragm :	(+�49.22)
Quantity:
Your Name:
Your Email:
Comments:

Home > Manufacturers > Entran

Request Info | Ask a Question

Site Last Updated: 06/01/09

Tools

Pressure Conversion

Equals

Resources

Pressure Measurement Glossary - Find explanations of terminology used for specifying and using pressure instruments

Pressure Unit Conversion - Look up conversion factors or select a conversion table for a particular pressure unit

Pressure Sensor Specification - Select parameters with PSAT to generate a spec for your own use or to submit as an enquiry

Contact

Help: Request Info

Ask a Question

News

29/11/08 : What is the difference between a pressure transducer and a transmitter
15/09/08 : What is the difference between gauge and absolute pressure measurement
25/08/08 : Advantages of using Silicon chip technology for sensing pressure
17/08/08 : What to consider when selecting a differential pressure sensor
11/08/08 : Digital sensor for high precision pressure calibration
05/07/08 : Data logging aggressive fluid level pressures
29/06/08 : Low cost HVAC pressure sensor for clean-room air flow monitoring
21/06/08 : Level sensor for shallow depth measurement
11/05/08 : Low pressure sensor for wet media
19/01/08 : Supply voltage and load resistance considerations for pressure transmitters
06/01/08 : Measuring liquid level in a sealed tank with a hydrostatic pressure sensor
18/11/07 : Determining the hydrostatic pressure range for a tank level sensor
18/09/07 : Interpreting specifications of pressure sensor accuracy
05/05/07 : Measuring vacuum pressure with negative gauge or absolute pressure ranges

RSS

News Feed

Products Feed