- Instrument Type
- Your Application
- Absolute Reference
- Air/Pneumatics
- Barometric/Atmospheric
- Certificates & Approvals
- Data Logging
- Differential
- Electrical Signal
- Flush Diaphragm
- High Viscosity Fluid Pressure Sensors
- Hydrostatic Level Sensors for Sewage and Slurries
- Fluid Level Sensors for Chemically Corrosive Media
- Hygienic Flush Pressure Sensors for Food and Dairy
- Gauge Reference
- High Accuracy
- High Frequency Response
- High Range
- High Temperature
- Intrinsically Safe
- Leak Testing
- Level Measurement
- Low Ranges
- Measuring Range
- Media Compatibility
- Miniature
- OEM Design
- Overpressure Protection
- PC Interfacing
- Pressure Calibration
- Process Connection
- Testing
- Sensor Technology
- Submersible
- Temperature & Pressure
- Vacuum
- Water Level
- Water Pressure
- Your Industry
- Manufacturers
EPIH Ultra Miniature Cylindrical Pressure Transducer
;)
Click Images to Enlarge
Very small diameter strain gauge pressure sensor with a round body for inserting into small holes and bonding with epoxy or elastomer adhesive. Diameters range from 1.27 up to 2.36 mm with pressure ranges from 0.35 bar up to 20 bar gauge, absolute or sealed gauge. Used for pressure profiling aerodynamic or hydrodynamic surfaces.
Product Parameters
Pressure Ranges: from 0.35 up to 20 bar gauge, absolute or sealed gauge
Output Signal: 75mV at 5Vdc excitation from 3.5bar ranges, 12mV 0.35bar, 24mV 0.7bar, 36mV 1bar, 60mV 1.5 bar
Supply Voltage: 5Vdc standard, ratiometric, 1, 2, 3, 4 or 10V can be specified
Input Impedance: 750ohms typical (1500ohms for 10Vdc excitation)
Output Impedance: 750 ohms
Diameter: Select from 1.27 to 2.36mm
Length: from 6.4 to 11.4mm excluding vent tube
Frequency Response: 25 to 340 kHz derived from 20% of lowest to highest pressure range natural frequency
Operating Temperature Range: -40 degC to 120 DegC
Product Description
The EPIH ultra miniature cylindrical pressure transducer has a minute exposed silicon chip strain gauge diaphragm which makes it possible to produce extremely small diameter pressure sensors and achieve very high frequency response to the dynamic changes in pressure.
The basic construction consists of a silicon chip set flush on the front end of a metal body with epoxy, wire connections plus the vented reference (gauge ranges only) are made on the reverse of the sensing diaphragm and exit via the back end of the metal tube.
Delivery Time
6-8 weeks plus dispatch time
Related Products
Other miniature pressure transducers
Millivolt output pressure transducers
Silicon diaphragm pressure transducers
Download Product Information
Site Last Updated: 09/02/12
Glossary - Find explanations for terminology used in specifying and using pressure instruments
Pressure Conversion - Look up conversion factors or select a conversion table for a particular pressure unit
Pressure Measuring Guide - Collection of guidance notes for sourcing, setting up and using pressure measurement equipment
News Articles - Archive of application notes, product releases and technical information
Answers - Search for questions already answered or submit a new question about a pressure measurement topic or product
Pressure Sensor Specification - Select parameters with PSAT to generate a spec for your own use or to submit as an enquiry
Product Finder - Choose multiple product and application types to filter out a suitable product
- 27/03/09 : Measuring vacuum pressure with negative gauge or absolute pressure ranges
- 29/11/08 : What is the difference between a pressure transducer and a transmitter
- 15/09/08 : What is the difference between gauge and absolute pressure measurement
- 17/08/08 : What to consider when selecting a differential pressure sensor
- 10/02/08 : What affects the performance of low pressure sensors
- 19/01/08 : Supply voltage and load resistance considerations for pressure transmitters
- 06/01/08 : Measuring liquid level in a sealed tank with a hydrostatic pressure sensor
- 18/09/07 : Interpreting specifications of pressure sensor accuracy