Waterproof Sensors for Measuring Hydrostatic Level

Permanent Immersion transducers and transmitters for lowering into a tank, borehole, river or reservoir.  Choose sensors with different diameters depending on the stilling well diameter.  Specify construction material for different media types such as duplex stainless steel, PVC or PVDF housings with PVC, PUR or FEP cable.

Submersible level transmitter for measuring liquid level with a 4-20mA current loop or a 0-10V voltage output plus optional ATEX approval for instrinsically safe use in hazardous areas in ranges from 1mH2O up to 250mH2O.

Submersible stainless steel pressure transmitter ideal for geotechnical surveying with a 19mm diameter for measuring hydrostatic water level in bore-holes. This small diameter level sensor has level ranges from 1 up to 250 metres water column and a 4-20mA current loop output signal.

Submersible waste water level sensor with optional intrinsic safety certification for monitoring the level of sewage and effluent in water treatment plants. Available in level ranges from 6 up to 250 meters of water gauge.

IP68 mid range pressure transmitter for measuring the level of highly contaminated and agressive liquid media with a body made from PVC or PVDF. Hydrostatic ranges from 4 mWC up to 100 mWC

All Titanium submersible pressure transmitter for measuring the hydrostatic level of leachate, brackish water or sea water. Ranges from 1 metre up to 250 metres of water column with option for ATEX approval for use zone 0 hazardous areas such as landfill sites.

Immersible low pressure sensor for measuring shallow liquid level with a rangeable 4-20mA current loop or high level voltage output signal in level ranges from 80mmH20 up to 160mH2O

Hydrostatic level sensor with an IP68 sealed electrical connection, stainless steel 316L or Duplex construction and a passive millivolt strain gauge output signal. Available in level ranges from 5 to 200 mWG gauge or absolute.

Absolute referenced hydrostatic depth sensor with an IP68 sealed electrical interface, stainless steel 316L or Duplex housing and a mV, amplified voltage or current output. Available in depth ranges from 5 to 200 mWG gauge or absolute.

IP68 sealed hydrostaic level transmitter with a 17.5 mm diameter for lowering into ground water boreholes for environmental monitoring of water level. Available in level ranges from 6 up to 200 metres of water gauge (650 ftH2O gage) with an accuracy of 0.25% full scale BSL.

Submersible Low Range waste water level transmitter with intrinsically safe option for monitoring the level of sewage and effluent in water treatment plants. Available in level ranges from 0.4 up to 4 meters of water gauge.

Marine approved level transmitter with 4-20mA current loop output for shipbuilding with optional all CuNiFe construction for sea-water compatibility in ranges from 0.4 mH2O to 250mH2O gauge.

IP68 low range pressure transmitter for measuring the level of highly contaminated and agressive liquid media with a body made from PVC or PVDF. Hydrostatic level ranges from 0.4 up to 4 metres of water column.