STS

Industrial and submersible sensors and loggers manufactured by STS Sensor Technik Sirnach AG in Switzerland for measuring pressure and temperature. STS specialise in silicon strain gauge sensing technology with a stainless steel 316L or Titanium construction.

All Titanium submersible pressure transmitter for measuring the hydrostatic level of leachate, brackish water or sea water. Ranges from 1 metre up to 250 metres of water column with option for ATEX approval for use zone 0 hazardous areas such as landfill sites.

Dual analogue output signal transmitter for simultaneous measurement of media pressure and temperature. Pressure ranges from 100 mbar up to 1000 bar and temperature measuring range from -25 to 100 DegC. To ensure good thermal contact with the media the temperature is measured just behind a flush diaphragm which has sufficient surface area to ensure minimal losses in media temperature at point of measurement.

Robust industrial self powered logger for recording up to 130,000 pressure values with a minimum logging interval time of 2 seconds. Select a pressure from 0 to 100 mbar to as high as 0 to 1000 bar gauge or absolute.

Passive compensated pressure transducer with a four arm semiconductor Wheatstone bridge circuit which produces a 100 millivolt with a 10 volt excitation. Pressure ranges from 0-100mbar up to 0-1000bar gauge or absolute. The silicon sensing chip is totally isolated from the media by an oil filled stainless steel 316L capsule with isolation membrane. This sensor is ideally suited for high frequency response applications since the output is only limited by the natural response of the silicon sensing capsule.

All stainless steel compact temperature transmitter with integrated Platinum resistance thermometer (PT100) for installing on machines, industrial process control, mobile hydraulics, HVAC or environmental monitoring equipment. Measure any temperature scaling between -50 to 150 degC and specify a voltage, current or RTD output.