enquiries@sensorsone.co.uk
- Instrument Type
- Your Application
- Current Output
- 2 wire 4-20mA General Purpose Pressure Sensors
- 2 wire 4-20mA Low Pressure Sensors
- 2 wire 4-20mA High Pressure Sensors
- 2 wire 4-20mA Hydrostatic Sensors
- 4-20mA Analog Out Indicators
- Current Loop Simulators
- 3 wire 0-20mA Pressure Sensors
- 3 wire 4-20mA Pressure Sensors
- 3 wire 0-20mA Hydrostatic Sensors
- 3 wire 4-20mA Hydrostatic Sensors
- 2 wire 4-20mA Temperature Sensors
- 3 wire 0-20mA Temperature Sensors
- Voltage Output
- Strain Gauge Output
- RS232 Serial Interface
- RS485 Serial Interface
- USB Serial Interface
- Solenoid Relay Switch
- Logic Relay Switch
- Current Input
- Voltage Input
- Millivolt Input
- Your Industry
- Manufacturers
IMSL IP68 Stainless Steel 316L Hydrostatic Pressure Sensor
;)
Click Images to Enlarge
Water resistant pressure sensor for measuring hydrostatic pressures in the range of 0-0.5 mWC up to 0-100 mWC. An all stainless steel 316L construction with Viton O rings seals and a choice of PUR, PVC or FEP vented cabling. The IMSL is used for measuring groundwater, aquifer, reservoir and borehole water level. The internal silicon strain gauge sensor provides a stable water level reading accurate to 0.1% of span linearity with low hysteresis and repeatability errors.
Product Parameters
Hydrostatic Level Ranges: 0.5 up to 0-100 mWC, 0-2 up to 0-10 bar absolute
Accuracy: 0.1% or 0.06% full scale BSL linearity (11-12 bit resolution)
Output Signal: 4-20 mA current loop output and voltage output, mV/V uncompensated
Electrical Connection: IP68 integral cable with a PUR, PVC or FEP jacket.
Pressure Connection: 1/4 BSP male with protective nose cone
Media Compatibility: SS 316L sensor body and diaphragm with Viton O ring seal and PUR, PVC or FEP coated cable
Diameter: 25 mm (1 inch)
Special Features: Low hydrostatic ranges
Product Description
The IMSL submersible pressure sensor utilises a silicon strain gauge sensing element which offers a very linear accuracy performance over the hydrostatic pressure range with minimal hysteresis and repeatability errors. Silicon strain gauge diaphragms also make it possible to measure very shallow depths without the need for increasing the diameter of the probe.
A wide choice of electrical output signals is available with 4-20mA for use in process plants and utilities, 10V, 5V dc voltage output signals for telemetry or data acquisition equipment and mV/V or 0-2.5Vdc outputs for applications requiring a low power consumption.
Related Products
Download Product Information
tel: +44 (0)844 800 9440
- Product Finder - Choose multiple product and application types to filter out a suitable product
- Pressure Sensor Specifier - Select parameters to generate a pressure transducer or transmitter specification for your own use or to submit as an enquiry
- Digital Indicator Specifier - Select options for creating a specification for a digital indicator or digital controller for your own use or to submit as an enquiry
- Measuring vacuum pressure with negative gauge or absolute pressure ranges
» view article - What is the difference between a pressure transducer and a transmitter
» view article - What is the difference between gauge and absolute pressure measurement
» view article - What to consider when selecting a differential pressure sensor
» view article - What affects the performance of low pressure sensors
» view article - Supply voltage and load resistance considerations for pressure transmitters
» view article - Measuring liquid level in a sealed tank with a hydrostatic pressure sensor
» view article - Interpreting specifications of pressure sensor accuracy
» view article