Current Input

Instrumentation for measuring 4 to 20 mA current loop output and displaying the scaled reading in the desired engineering units or retransmitting via a digital or analogue retransmission channel.

Four digit reading digital indicator for monitoring the signal from current, voltage or millivolt output sensors with setable alarms for switching equipment on/off at predetermined levels such as fans, pumps or valve.

Multifunctional digital controller for processing the signal from an extensive range of sensors for the purpose of controlling a process or recording test data. The CMC99 has a modular design with three slots in the rear for adding analogue signal conditioning cards which can handle up to 48 signals at once.

Panel mount LED display instrument with up to 4 sensor input channels, 4 relay or logic outputs, high speed display update and maths function for displaying the differential pressure of 2 input channels.

Green or Red LED multi-display configurable digital instrument for controlling valves, actuators, motors & pumps with inputs from pressure sensors, thermocouples, RTD, strain gauges, potentiometers, current loop & amplified output signal sensors.

LED digital readout display with up to 4 configrable process alarm relays for mounting in a 48mm x 48mm (1/16 DIN) panel cutout. This process alarm indicator can be specified to operate on 100-240Vac/dc or 11-27Vac/dc.

Digital Readout with alarm relays for mounting in a process or test panel which can be used with pressure transducers & transmitters, thermocouples, RTD, potentiometers, current loop & amplified voltage output sensors.

Digital meter with a 4 digit red LED display for mounting in a 48mm x 48mm (1/16 DIN) cutout panel for measuring volts, current, TC, RTD, PTC, NTC and potientiometer input signals.

Digital Readout with LED display for mounting in a panel which can accept inputs from pressure transducers & transmitters, thermocouples, RTD, potentiometers, current loop & amplified voltage output sensors.

Plug-on digital display for adding a local indicator to a pressure or liquid level sensor with a 4-20mA or 0-10Vdc output. No extra power supply is required since the PA430 is powered by the sensor supply. Mix and match Binder, M12 electrical and DIN plug and socket connector types. Optional ATEX IS approval for hazardous areas and 1 or 2 contact PNP switches for on/off process control function.

An easy to install wall mounted digital display for use in high humidity or outdoor environments to provide a convenient way of monitoring a measured reading with minimal installation. Enclosed in a box the 4 digital LED indicator can be configured via the front keypad or an infrared remote control to measure any sensor with a 4 to 20mA output signal.