Home > Your Application > Measurement Signal > Voltage Output > 0-5V Pressure Sensors
Pressure transducers and transmitters with a 0 to 5 volt dc analogue output.
Motorsport pressure transducer with 21mm diameter and and 24mm body length for pressure ranges from 0.5 up to 400 bar gauge or absolute. Available with millivolt and amplified voltage output signals covering the majority of motorsport analogue input signals.
Dual analogue output signal transmitter for simultaneous measurement of media pressure and temperature. Pressure ranges from 100 mbar up to 1000 bar and temperature measuring range from -25 to 100 DegC. To ensure good thermal contact with the media the temperature is measured just behind a flush diaphragm which has sufficient surface area to ensure minimal losses in media temperature at point of measurement.
Differential pressure transmitter with high over-load capability for measuring low differential pressures from 8mb up to 6 bar differential.
Low range differential pressure sensor with rangeable 4-20mA current loop or amplified voltage output signal in pressure ranges from 1.6mb up to 6 bar differential
Low cost ceramic diaphragm pressure transmitter available on a short lead time. Pressure ranges starting from 1000 mbar up to 0-700 bar gauge or absolute. Electrical signals 4-20mA, 0-5V or 0-10V can be selected. A choice of DIN plug connector or integral cable can be specified for the electical interface.
Versatile low price pressure transducer with a wide selection of electrical and mechanical options to enable the customisation of the sensor to suit most industrial, automation and OEM design installations. A dry cell ceramic strain gauge sensing diaphragm provides a high corrosion resistance to many types of harsh chemical media commonly found in automated industrial processes and machinery monitoring applications.
Low cost sensor for measuring small pressure ranges from 0-50 mbar (10 inH2O) to 0-1000 mbar (15 psi) of liquids or gases. Choose from a full list of outputs, electrical, connectors and accuracy specs to meet your OEM custom product integration requirements.
High precision compact wet wet differential pressure transmitter with digitally corrected 4-20mA current loop or amplified voltage output signal in pressure ranges from 1 up to 30 bar differential.
Home > Your Application > Measurement Signal > Voltage Output > 0-5V Pressure Sensors Need help? Ask a question | Send email tel: +44 (0)844 800 9440
tel: +44 (0)844 800 9440
Pressure Conversion bar psi mbar N/m² Pa hPa kPa MPa kg/cm² mmH2O 4°C cmH2O 4°C mH2O 4°C inH2O 4°C ftH2O 4°C mmHg 0°C cmHg 0°C inHg 0°C Torr mTorr atm at dyn/cm² oz/in² µHg 0°C tsi (uk, long) tsi (usa, short) tsf (usa, short) psf g/cm² Converts to bar psi mbar N/m² Pa hPa kPa MPa kg/cm² mmH2O 4°C cmH2O 4°C mH2O 4°C inH2O 4°C ftH2O 4°C mmHg 0°C cmHg 0°C inHg 0°C Torr mTorr atm at dyn/cm² oz/in² µHg 0°C tsi (uk, long) tsi (usa, short) tsf (usa, short) psf g/cm²
IP Ratings Explained I P 0 1 2 3 4 5 6 0 1 2 3 4 5 6 7 8 9K First Digit (Solids) No protection Second Digit (Liquids) No protection
Temperature Conversion Celsius Kelvin Fahrenheit Converts to Celsius Kelvin Fahrenheit
©2013 SensorsONE Ltd, all rights reserved.