0-10V Pressure Sensors

Amplified output pressure sensors with a 0 volt output for a null value increasing to 10 volts for the full range value.

High precision pressure transmitter for measuring very low vented gauge reference or differential air pressures. Each presssure range can be adjusted to scale the 4-20mA or 0-10 volt output signal from 10 to 100% of the base range. Designed for measuring pressures across air filters, ventilation fans and valves on HVAC and pneumatic systems.

Motorsport pressure transducer with 21mm diameter and and 24mm body length for pressure ranges from 0.5 up to 400 bar gauge or absolute. Available with millivolt and amplified voltage output signals covering the majority of motorsport analogue input signals.

Dual analogue output signal transmitter for simultaneous measurement of media pressure and temperature. Pressure ranges from 100 mbar up to 1000 bar and temperature measuring range from -25 to 100 DegC. To ensure good thermal contact with the media the temperature is measured just behind a flush diaphragm which has sufficient surface area to ensure minimal losses in media temperature at point of measurement.

Wet wet differential pressure sensor with a high overpressure rating on both positive and negative side port for protection against accidental diaphragm damage. The DMD 331 has 6 nominal pressure range from 0-0.2 bar up to 0-16 bar differential and each range has a choice of sub-ranges which can be selected depending on the required level of overpressure rating. The differential pressure signals can be transmitted as linear 4-20mA or 0-10Vdc analog output.

Small size dp sensor for measuring differential air pressure on HVAC, compress air and pneumatic control systems. The DMD341 is used to measure pressures in the range of 0-6 mbar up to 0-1000 mbar differential. An output signal of 4-20mA, 0-20mA or 0-10Vdc can be chosen to suit the signal conditioning of most air handling management systems.

Screw-in pressure transmitter with flush stainless steel 316L diaphragm for measuring pressures of fluids with very high viscosity from 900 psi up to 6000 psi gauge or absolute. Options available for high temperatures up to 300 deg C and intrinsic safety.

Stainless steel pressure transmitter with ranges from 100mbar up to 40 bar gauge or absolute with optional accuracy ranging from the standard 0.35% FS up to 0.1% FS. Special options such as ATEX approval, SIL approval and compound ranges are also available.

High precision pressure transmitter with an accuracy of 0.1%FS BSL NLHR and digitally adjustable pressure ranges from 400mb up to 40 bar gauge & absolute

Sanitary pressure sensor wth exposed diaphragm with no crevices for high temperatures up to 300 Degrees Celsius in ranges from 100mb up to 40 bar gauge or absolute

Stainless steel 316L wetted parts pressure sensor for high pressure ranges from 60 bar (900 psi) up to 600 bar (9000 psi). Used on applications such as hydraulic test benches, presses, injection moulding machines, hydraulic actuation and vehicle hydraulic systems. Accurate to 0.35% FS with options for 0.25% or 0.1% FS. Good long term stability of 0.1% FS over a period of 1 year.

High performance transducer with adjustable scaling for modifying the pressure range for different applications. Ranges from 0-60 bar up to 0-600 bar gauge or absolute. The output signal is accurate to 0.1% of base range or 0.5% with a 10:1 turn-down, and a 14 bit analogue to digital conversion provides a high resolution amplified output. Optional software and interface kit is available for re-ranging the output signal.

Based around a high integrity all welded thin film strain gauge sensing element, this high range pressure transducer is designed for measuring hydraulic pressures up to 2200 bar (~32,000 psi) on equipment such as hydraulic presses, injection moulding machines and other high range monitoring and control systems.

Pneumatic pressure sensor for measuring very low gauge reference pressures with ranges starting from 10 mbar (4 inH2O) up to 1000 mbar (400 inH2O) gauge. Ideal for use on pneumatic control systems, heating, ventilation and air conditioning systems (HVAC) and computer equipment rooms.

Ultra low differential pressure sensor for HVAC applications with 4-20mA current loop or amplified voltage output signal in pressure ranges from 0.1 mb up to 1 bar differential.

Differential air pressure sensor with a 10 volt or a 4-20mA output for building ventilation applications. Designed for incorporating into a building HVAC management system to monitor and control the distribution of warm or cool air through ventilation ducts. Pressure ranges from 0 to 1 mbar up to 0 to 1000 mbar differential.

Three in one electronic pressure switch, digital pressure gauge and pressure sensor with pressure ranges from 100 mbar up to 600 bar (1.5 to 9000 psi) gauge or absolute.

Measure vacuum, positive gauge and absolute pressures from -1 bar (-15psi) up to 40 bar (600psi) with this all in one electronic switch, gauge and sensor. Designed specifically for use in the food, drink and biomedical industry for measuring process pressures and vessel contents. Choose dairy pipe or clamp type sanitary process fittings and select a food grade oil fill as the diaphragm isolation fluid. For pharmaceutical installations requiring hazardous dust protection the instrument includes the option for ATEX intrinsic safety.

Combined sensor, electronic switch and digital gauge with an all welded stainless steel flush face diaphragm for measuring the pressure of high viscosity liquids or gases and fluid requiring a high level of cleanliness. Choose measuring ranges from 60 bar up to 400 bar with gauge or absolute reference. Select different sizes of BSP thread for a screw-in type pressure fitting. The integrated digital readout can be configured to read in any pressure units and process pressure limits can be set for controlling external equipment.

Low range three in one pressure switch, pressure indicator and pressure sensor for use on pneumatics and vacuum technology in a choice of ranges starting from 0 to 10 mbar gauge (4 inH2O) up to 0 to 1000 mbar gauge (400 inH2O) plus a 0 to -1000 mbar vacuum range. Compatible with gases, compressed air and low viscosity non-aggressive fluids.

Low cost ceramic diaphragm pressure transmitter available on a short lead time. Pressure ranges starting from 1000 mbar up to 0-700 bar gauge or absolute. Electrical signals 4-20mA, 0-5V or 0-10V can be selected. A choice of DIN plug connector or integral cable can be specified for the electical interface.

Versatile low price pressure transducer with a wide selection of electrical and mechanical options to enable the customisation of the sensor to suit most industrial, automation and OEM design installations. A dry cell ceramic strain gauge sensing diaphragm provides a high corrosion resistance to many types of harsh chemical media commonly found in automated industrial processes and machinery monitoring applications.

Low cost sensor for measuring small pressure ranges from 0-50 mbar (10 inH2O) to 0-1000 mbar (15 psi) of liquids or gases. Choose from a full list of outputs, electrical, connectors and accuracy specs to meet your OEM custom product integration requirements.

High precision compact wet wet differential pressure transmitter with digitally corrected 4-20mA current loop or amplified voltage output signal in pressure ranges from 1 up to 30 bar differential.

High pressure differential sensor that has high over-pressure with 4-20mA current loop or amplified voltage output in scaleable differential ranges from 3 bar up to 300 bar differential