- Instrument Type
- Your Application
- Absolute Reference
- Air/Pneumatics
- Barometric/Atmospheric
- Certificates & Approvals
- Data Logging
- Differential
- Electrical Signal
- Flush Diaphragm
- Gauge Reference
- High Accuracy
- High Frequency Response
- High Range
- High Temperature
- Intrinsically Safe
- Gauge Pressure Transmitters with Ex Certification
- Absolute Pressure Transmitters for Hazardous Areas
- Differential Pressure Transmitters with ATEX Approval
- Pressure Gauges with Intrinsic Safety Approval
- Hand Held Manometers for use in Hazardous Areas
- Field Pressure Calibrators for use in Hazardous Zones
- Pressure Data Loggers with ATEX Certification
- IP68 Liquid Level Transmitters with ATEX Approval
- Tank Level Transmitters for Flammable Atmospheres
- Pressure Switches for Intrinsically Safe Areas
- mV Output Pressure Sensors with IS Approval
- Leak Testing
- Level Measurement
- Low Ranges
- Measuring Range
- Media Compatibility
- Miniature
- OEM Design
- Overpressure Protection
- PC Interfacing
- Pressure Calibration
- Process Connection
- Testing
- Sensor Technology
- Submersible
- Temperature & Pressure
- Vacuum
- Water Level
- Water Pressure
- Your Industry
- Manufacturers
mV Output Pressure Sensors with IS Approval
ATEX approved four wire millivolt output signal pressure sensors for use in flammable areas. These pressure sensors have a Wheatstone bridge circuit configuration with 2 supply input connections and 2 signal output connections and only work with IS barriers suitable for use with strain gauge output devices.
Passive compensated pressure transducer with a four arm semiconductor Wheatstone bridge circuit which produces a 100 millivolt with a 10 volt excitation. Pressure ranges from 0-100mbar up to 0-1000bar gauge or absolute. The silicon sensing chip is totally isolated from the media by an oil filled stainless steel 316L capsule with isolation membrane. This sensor is ideally suited for high frequency response applications since the output is only limited by the natural response of the silicon sensing capsule.
Site Last Updated: 08/02/12
Glossary - Find explanations for terminology used in specifying and using pressure instruments
Pressure Conversion - Look up conversion factors or select a conversion table for a particular pressure unit
Pressure Measuring Guide - Collection of guidance notes for sourcing, setting up and using pressure measurement equipment
News Articles - Archive of application notes, product releases and technical information
Answers - Search for questions already answered or submit a new question about a pressure measurement topic or product
Pressure Sensor Specification - Select parameters with PSAT to generate a spec for your own use or to submit as an enquiry
Product Finder - Choose multiple product and application types to filter out a suitable product
- 27/03/09 : Measuring vacuum pressure with negative gauge or absolute pressure ranges
- 29/11/08 : What is the difference between a pressure transducer and a transmitter
- 15/09/08 : What is the difference between gauge and absolute pressure measurement
- 17/08/08 : What to consider when selecting a differential pressure sensor
- 10/02/08 : What affects the performance of low pressure sensors
- 19/01/08 : Supply voltage and load resistance considerations for pressure transmitters
- 06/01/08 : Measuring liquid level in a sealed tank with a hydrostatic pressure sensor
- 18/09/07 : Interpreting specifications of pressure sensor accuracy