![]()
DIN16288 (EN837) style 1/4 inch british standard pipe thread (G 1/4) pressure transducers, gages and manometers which have a small diameter stub protruding from the very end of the male thread which is used to seat an O ring for sealing around a small hole located at the bottom of the female thread of the mating part. This type of seal is very commonly found on analog dial pressure gauges and is often referred to as a gauge fitting.
High precision pressure transmitter with an accuracy of 0.1%FS BSL NLHR and digitally adjustable pressure ranges from 400mb up to 40 bar gauge & absolute
Digital pressure gauge with ranges from 0.6 bar (9 psi) up to 600 bar (9000 psi) gauge or absolute for measuring pneumatic or hydraulic pressures to an accuracy of 0.25% full scale. A selection of pressure fittings can be specified which include G1/2 & G1/4 male EN837 test point or 1/2 & 1/4 NPT male.
Three in one electronic pressure switch, digital pressure gauge and pressure sensor with pressure ranges from 100 mbar up to 600 bar (1.5 to 9000 psi) gauge or absolute.
Precision digital pressure gauge with ranges from 100 mbar (1.5 psi) up to 600 bar (9000 psi) gauge or absolute for measuring pneumatic or hydraulic pressures to an accuracy of 0.125% FS BSL. A selection of pressure fittings can be specified which include G1/2 & G1/4 male EN837 test point or 1/2 & 1/4 NPT male.
Stainless steel pressure transmitter with ranges from 100mbar up to 40 bar gauge or absolute with optional accuracy ranging from the standard 0.35% FS up to 0.1% FS. Special options such as ATEX approval, SIL approval and compound ranges are also available.
Stainless steel 316L wetted parts pressure sensor for high pressure ranges from 60 bar (900 psi) up to 600 bar (9000 psi). Used on applications such as hydraulic test benches, presses, injection moulding machines, hydraulic actuation and vehicle hydraulic systems. Accurate to 0.35% FS with options for 0.25% or 0.1% FS. Good long term stability of 0.1% FS over a period of 1 year.
High performance transducer with adjustable scaling for modifying the pressure range for different applications. Ranges from 0-60 bar up to 0-600 bar gauge or absolute. The output signal is accurate to 0.1% of base range or 0.5% with a 10:1 turn-down, and a 14 bit analogue to digital conversion provides a high resolution amplified output. Optional software and interface kit is available for re-ranging the output signal.
Pneumatic pressure sensor for measuring very low gauge reference pressures with ranges starting from 10 mbar (4 inH2O) up to 1000 mbar (400 inH2O) gauge. Ideal for use on pneumatic control systems, heating, ventilation and air conditioning systems (HVAC) and computer equipment rooms.
Three in one hydrostatic level switch, digital level gauge and level sensor with level ranges from 1 mWG up to 600 mWG (3.3 to 1969 ftWG).
Low range three in one pressure switch, pressure indicator and pressure sensor for use on pneumatics and vacuum technology in a choice of ranges starting from 0 to 10 mbar gauge (4 inH2O) up to 0 to 1000 mbar gauge (400 inH2O) plus a 0 to -1000 mbar vacuum range. Compatible with gases, compressed air and low viscosity non-aggressive fluids.
Passive compensated pressure transducer with a four arm semiconductor Wheatstone bridge circuit which produces a 100 millivolt with a 10 volt excitation. Pressure ranges from 0-100mbar up to 0-1000bar gauge or absolute. The silicon sensing chip is totally isolated from the media by an oil filled stainless steel 316L capsule with isolation membrane. This sensor is ideally suited for high frequency response applications since the output is only limited by the natural response of the silicon sensing capsule.
Site Last Updated: 07/02/12
Glossary - Find explanations for terminology used in specifying and using pressure instruments
Pressure Conversion - Look up conversion factors or select a conversion table for a particular pressure unit
Pressure Measuring Guide - Collection of guidance notes for sourcing, setting up and using pressure measurement equipment
News Articles - Archive of application notes, product releases and technical information
Answers - Search for questions already answered or submit a new question about a pressure measurement topic or product
Pressure Sensor Specification - Select parameters with PSAT to generate a spec for your own use or to submit as an enquiry
Product Finder - Choose multiple product and application types to filter out a suitable product
©2012 SensorsONE Ltd, all rights reserved.