- Instrument Type
- Your Application
- Absolute Reference
- Air/Pneumatics
- Barometric/Atmospheric
- Certificates & Approvals
- Data Logging
- Differential
- Flush Diaphragm
- Gauge Reference
- High Accuracy
- High Frequency Response
- High Range
- High Temperature
- Intrinsically Safe
- Leak Testing
- Level Measurement
- Low Ranges
- Measurement Signal
- Measuring Range
- Media Compatibility
- Miniature
- OEM Design
- Overpressure Protection
- PC Interfacing
- Pressure Calibration
- Process Connection
- 1/4 BSP Male DIN3852
- 1/4 BSP Male DIN16288
- 1/4 BSP Female
- 1/2 BSP Male DIN3852
- 1/2 BSP Male DIN16288
- 1/8 BSP Male DIN3852
- 1/4 NPT Male
- 1/4 NPT Female
- 1/2 NPT Male
- 1/8 NPT Male
- 1/8 NPT Female
- Flush 1/2 BSP Male
- Flush 1 inch BSP Male
- Flush 1 1/2 BSP Male
- 7/16-20 UNF Male
- 7/16-20 UNF Female
- M12 Male
- M14 Male
- Clamp Flush
- Dairy Pipe
- Autoclave Engineers
- Testing
- Sensor Technology
- Submersible
- Temperature & Pressure
- Vacuum
- Water Level
- Water Pressure
- Your Industry
- Manufacturers
DS210 Combined Low Pressure Switch, Indicator and Sensor
;)
Click Images to Enlarge
Low range three in one pressure switch, pressure indicator and pressure sensor for use on pneumatics and vacuum technology in a choice of ranges starting from 0 to 10 mbar gauge (4 inH2O) up to 0 to 1000 mbar gauge (400 inH2O) plus a 0 to -1000 mbar vacuum range. Compatible with gases, compressed air and low viscosity non-aggressive fluids.
Product Parameters
Pressure Ranges: 10 mb up to 1 bar g and -1 bar g
Accuracy: 0.35%FS > 0.1 bar, 0.5%FS <= 0.1 bar, IEC60770 (analogue output)
Output Signals: 4 to 20 mA 2 wire, 0 to 10 Volt 3 wire and Adjustable 4 to 20 mA 3 wire
Electrical Connections: DIN43650A plug & socket, cable gland, Binder 5 pin, M12 x 1 5-8 pin plastic or 5pin metal connector
Pressure Connections: G1/2 and G1/4 DIN3852 or EN837, G1/2 DIN3852 open port, 1/2 and 1/4 NPT male
Display: 4 digit red LED, ±0.1% FS ± 1 digit accuracy plus analogue output accuracy
Switch Contacts: PNP, 125 mA max for 4-20 mA (2 or 3 wire) and 500 mA max for 0-10 V output.
Environmental Protection: IP 65
Special Options: 5 to 1 rangeable, ATEX approved for hazardous areas
Product Description
The DS 210 low pressure switch, indicator and sensor utilises an exposed silicon diaphragm for extra sensitivity at low pressures whilst maintaining a high accuracy for the analogue output of 0.35% full scale for ranges above 100 mbar and 0.5% full scale for ranges below 100 mbar.
The digital LED display can be configured by the user to display in any pressure units and the 1 or 2 switch contacts can be set to trigger at any pressure within the range. The DS230 combined low pressure switch, readout and sensor is externally powered via a cable or connector exiting from the top of the instrument which is also used for the analogue output if specified.
Related Products
Pressure transmitters for measuring low level pressures
Battery powered pressure gauges for monitoring low pressures
Plug on LED meter for 4-20mA low range pressure transmitters
Panel mount digital readout for low pressure sensors
Download Product Information
Site Last Updated: 24/05/12
Glossary - Find explanations for terminology used in specifying and using pressure instruments
Pressure Conversion - Look up conversion factors or select a conversion table for a particular pressure unit
Pressure Measuring Guide - Collection of guidance notes for sourcing, setting up and using pressure measurement equipment
News Articles - Archive of application notes, product releases and technical information
Answers - Search for questions already answered or submit a new question about a pressure measurement topic or product
Pressure Sensor Specification - Select parameters with PSAT to generate a spec for your own use or to submit as an enquiry
Product Finder - Choose multiple product and application types to filter out a suitable product
- 27/03/09 : Measuring vacuum pressure with negative gauge or absolute pressure ranges
- 29/11/08 : What is the difference between a pressure transducer and a transmitter
- 15/09/08 : What is the difference between gauge and absolute pressure measurement
- 17/08/08 : What to consider when selecting a differential pressure sensor
- 10/02/08 : What affects the performance of low pressure sensors
- 19/01/08 : Supply voltage and load resistance considerations for pressure transmitters
- 06/01/08 : Measuring liquid level in a sealed tank with a hydrostatic pressure sensor
- 18/09/07 : Interpreting specifications of pressure sensor accuracy