Paper & Pulp

LMK331 Screw-In Ceramic Level Transmitter

Level pressure sensor with semi-flush ceramic diaphragm and stainless steel or PVDF wetted parts for aggressive corrosive media in ranges from 4mH2O up to 600mH2O gauge.

DMP331P Hygienic Flush Pressure Transmitter

Sanitary pressure sensor wth exposed diaphragm with no crevices for high temperatures up to 300 Degrees Celsius in ranges from 100mb up to 40 bar gauge or absolute

TPFADA Flush Diaphragm Pressure Transmitter

Flush diaphragm pressure transmitter for high viscosity media in food processing and plastic injection moulding applications. The TPFADA is available with a 4-20mA current loop or amplified voltage output signal and pressure ranges from 10 up to 1000 barg.

ATM-T Pressure and Temperature Dual Output Transmitter

Dual analogue output signal transmitter for simultaneous measurement of media pressure and temperature. Pressure ranges from 100 mbar up to 1000 bar and temperature measuring range from -25 to 100 DegC. To ensure good thermal contact with the media the temperature is measured just behind a flush diaphragm which has sufficient surface area to ensure minimal losses in media temperature at point of measurement.

DMK331P Flush Diaphragm Pressure Sensor

Screw-in pressure transmitter with flush stainless steel 316L diaphragm for measuring pressures of fluids with very high viscosity from 900 psi up to 6000 psi gauge or absolute. Options available for high temperatures up to 300 deg C and intrinsic safety.

LMK351 High Overpressure Flush Level Transmitter

Flush capacitive ceramic pressure sensor for measuring corrosive and viscous liquid level from levels 0.4 metres of water up to 200 mH2O. This screw-in fluid level transmitter features high overload rating up to 50x and options for all plastic wetted parts.

PGS40 Mid Pressure Calibration Hand Pump

Pneumatic hand pump for applying test and calibration pressures with precision from -0.96 up to 40 bar gauge.

PGS700 High Pressure Calibration Hand Pump

Hydraulic hand pump for applying test and calibration pressures with precision from 0 to 700 bar gauge (10,000 psi).

XMD Process Plant DP Cell Differential Pressure Transmitter

Rangeable DP Cell current loop process transmitter for monitoring differential pressures in a heavy duty process plant environment. The XMD has a standard process configuration with kidney flange mounting arrangement and large accessible electronic housing. Other features include ATEX intrinsic safety or flameproof, linear or square root extraction 4-20mA output, HART communications, 10 to 1 turndown ranging, LCD readout and 130 bar overpressure protection on one side.

XMPi Process Plant Gauge and Absolute Pressure Transmitter

Process transmitter for measuring vacuum, steam, food, pharmaceutical, oil, gas and other pressure readings necessary for the monitoring and control of bulk production processes. Suitable for deploying in many locations and feeding pressure readings back to the site distributed control system (DCS). Includes HART protocol interface, 10:1 adjustable range scaling and ATEX intrinsic safety as standard, with options for flameproof, 300degC media temperature and integrated local digital indicator. Available in pressure ranges from 0-400mbar up to 0-600 bar gauge or absolute, and compound ranges from -0.4 to +0.4 bar up to -1 to 10 bar gauge.