Pressure transducer elements with and without compensation electronics for incorporating into OEM instrumentation products to monitor or control pressure.
These pressure sensing component elements can be adapted for integration into many different types of applications that include automation, medical instrumentation, automotive, water industry instruments, environmental monitoring equipment, refrigeration, data logging, pneumatic/hydraulic controls, gas analysers, chemical detectors, tank level management, robotics, subsea probes and many other areas of original equipment manufacture.
Your special mechanical mounting arrangements can be accommodated with specially moulded or machined parts that conform to your required dimensions and material requirements.
A broad spectrum of electrical connector interfaces starting from basic solder pads for wiring your the electronics with your own components to flexible circuits incorporating a circuit board connector and signal conditioning electronics for easy assembly during manufacture.
Versatile low price pressure transducer with a wide selection of electrical and mechanical options to enable the customisation of the sensor to suit most industrial, automation and OEM design installations. A dry cell ceramic strain gauge sensing diaphragm provides a high corrosion resistance to many types of harsh chemical media commonly found in automated industrial processes and machinery monitoring applications.
Low cost sensor for measuring small pressure ranges from 0-50 mbar (10 inH2O) to 0-1000 mbar (15 psi) of liquids or gases. Choose from a full list of outputs, electrical, connectors and accuracy specs to meet your OEM custom product integration requirements.
Economical IP68 protected sensor with stainless steel 316L housing and Ceramic strain gauge sensing diaphragm for measuring liquid depth pressure or the pressure in a submerged pipe or vessel. Measure hydrostatic pressure from from 0 to 10 mWC (33 ftWC) up to 0 to 100 mWC (330 ftWc) and convert reading to a millivolt, current or voltage signal output. The Ceramic diaphragm has a high chemical resistance to media such as leachate and seawater, and the housing can be upgraded to Duplex stainless steel if necessary for extra material protection. A PUR coated cable is fitted as standard, but for additional chemical protection an FEP coated cable can be supplied.
IP68 combined liquid level and temperature, dual 4 to 20 milliamp output pressure sensor with a 316L or Duplex stainless steel housing and a high corrosion resistant ceramic sensing diaphragm. The IMCTL is available with ranges starting from 10 mWC (33 ftWC) to a maximum range of 100 mWC (330 ftWc) and can measure temperature over a choice of four different scaled ranges between -20 to +60 degC.
Piezo-resistive pressure transducer with a 2mV/V or 10mV/V output signal in pressure ranges from 1 bar up to 700 bar gauge or absolute.
Water resistant pressure sensor for measuring hydrostatic pressures in the range of 0-0.5 mWC up to 0-100 mWC. An all stainless steel 316L construction with Viton O rings seals and a choice of PUR, PVC or FEP vented cabling. The IMSL is used for measuring groundwater, aquifer, reservoir and borehole water level. The internal silicon strain gauge sensor provides a stable water level reading accurate to 0.1% of span linearity with low hysteresis and repeatability errors.
Stainless steel 316L waterproof probe for measuring both water temperature and depth and generating two separate 4-20mA current loop measurement signals. Select temperature measurement ranges from -20 to +60 deg C and depth ranges of 0-0.5mWG to 0-100mWG.
Economical pressure transducer for monitoring fluid level inside a tank where there is no external mounting point at the bottom of the tank. Measure liquid contents of tanks with heights from 0.5 metres (1.64 feet) to 10 metres (32.8 feet) high. Choose between a low powered millivolt output, 0.5 to 4.5 vdc signal or a process control 4-20mA current loop signal.
IP68 protect pressure sensor for monitoring fresh water level to depths of 100 metres. This stainless steel drinking water compatible level sensor has been assesed and certified by the Water Regulations Advisory Scheme (WRAS) for compliance with the UK water regulations. The materials and fittings used in the mechanical construction of the IWSL water level sensor meet the standards required by the water supply byelaws of England, Wales and Scotland.
tel: +44 (0)844 800 9440
©2013 SensorsONE Ltd, all rights reserved.