OEM Voltage Output Pressure Transducers

Basic or custom designed pressure transducer packages for incorporating into your product design. These pressure transducers are used in measurement circuit designs which have 3 or 4 wire voltage input sensor conditioning electronics.

Pressure transducers with amplified signal conditioning can be custom designed to suit any OEM requirement with a choice of high dc voltage outputs such as 0-5, 0-10, 1-5, 0.5-4.5, 1-10, 1-6 or 0-6 volts dc.  The outputs are pre-compensated and rationalised to allow immediate assembly without the need for any performance testing prior to instrument build.

To facilitate custom ranging and stock commonality, it is possible for the customer to re-range the voltage output via digital communications to create extra ranges from each pressure rated diaphragm.

Specify your OEM voltage output pressure transducer requirements

Small size dp sensor for measuring differential air pressure on HVAC, compress air and pneumatic control systems. The DMD341 is used to measure pressures in the range of 0-6 mbar up to 0-1000 mbar differential. An output signal of 4-20mA, 0-20mA or 0-10Vdc can be chosen to suit the signal conditioning of most air handling management systems.

Economical IP68 protected sensor with stainless steel 316L housing and Ceramic strain gauge sensing diaphragm for measuring liquid depth pressure or the pressure in a submerged pipe or vessel. Measure hydrostatic pressure from from 0 to 10 mWC (33 ftWC) up to 0 to 100 mWC (330 ftWc) and convert reading to a millivolt, current or voltage signal output. The Ceramic diaphragm has a high chemical resistance to media such as leachate and seawater, and the housing can be upgraded to Duplex stainless steel if necessary for extra material protection. A PUR coated cable is fitted as standard, but for additional chemical protection an FEP coated cable can be supplied.

Versatile low price pressure transducer with a wide selection of electrical and mechanical options to enable the customisation of the sensor to suit most industrial, automation and OEM design installations. A dry cell ceramic strain gauge sensing diaphragm provides a high corrosion resistance to many types of harsh chemical media commonly found in automated industrial processes and machinery monitoring applications.

Low cost sensor for measuring small pressure ranges from 0-50 mbar (10 inH2O) to 0-1000 mbar (15 psi) of liquids or gases. Choose from a full list of outputs, electrical, connectors and accuracy specs to meet your OEM custom product integration requirements.

Water resistant pressure sensor for measuring hydrostatic pressures in the range of 0-0.5 mWC up to 0-100 mWC. An all stainless steel 316L construction with Viton O rings seals and a choice of PUR, PVC or FEP vented cabling. The IMSL is used for measuring groundwater, aquifer, reservoir and borehole water level. The internal silicon strain gauge sensor provides a stable water level reading accurate to 0.1% of span linearity with low hysteresis and repeatability errors.

Economical pressure transducer for monitoring fluid level inside a tank wehre there is no external mounting point at the bottom of the tank. Measure liquid contents of tanks with heights from 0.5 metres (1.64 feet) to 10 metres (32.8 feet) high. Choose between a low powered millivolt output, 0.5 to 4.5 vdc signal or a process control 4-20mA current loop signal.