Amplified voltage output pressure transducers for monitoring liquid level in tanks for storing water, wastewater, fuels, beverages, cargo and chemicals. These transducers measure liquid level by sensing the hydrostatic pressure pressing down on the transducer by the head of liquid above it. Choose from transducers designed to be dropped down into a tank or ones which can be fitted to the outside of the tank via a flange or threaded port.
Level pressure sensor with semi-flush ceramic diaphragm and stainless steel or PVDF wetted parts for aggressive corrosive media in ranges from 4mH2O up to 600mH2O gauge.
Economical IP68 protected sensor with stainless steel 316L housing and Ceramic strain gauge sensing diaphragm for measuring liquid depth pressure or the pressure in a submerged pipe or vessel. Measure hydrostatic pressure from from 0 to 10 mWC (33 ftWC) up to 0 to 100 mWC (330 ftWc) and convert reading to a millivolt, current or voltage signal output. The Ceramic diaphragm has a high chemical resistance to media such as leachate and seawater, and the housing can be upgraded to Duplex stainless steel if necessary for extra material protection. A PUR coated cable is fitted as standard, but for additional chemical protection an FEP coated cable can be supplied.
Immersible low pressure sensor for measuring shallow liquid level with a rangeable 4-20mA current loop or high level voltage output signal in level ranges from 80mmH20 up to 160mH2O
Three in one hydrostatic level switch, digital level gauge and level sensor with level ranges from 1 mWG up to 600 mWG (3.3 to 1969 ftWG).
Measure vacuum, positive gauge and absolute pressures from -1 bar (-15psi) up to 40 bar (600psi) with this all in one electronic switch, gauge and sensor. Designed specifically for use in the food, drink and biomedical industry for measuring process pressures and vessel contents. Choose dairy pipe or clamp type sanitary process fittings and select a food grade oil fill as the diaphragm isolation fluid. For pharmaceutical installations requiring hazardous dust protection the instrument includes the option for ATEX intrinsic safety.
Water resistant pressure sensor for measuring hydrostatic pressures in the range of 0-0.5 mWC up to 0-100 mWC. An all stainless steel 316L construction with Viton O rings seals and a choice of PUR, PVC or FEP vented cabling. The IMSL is used for measuring groundwater, aquifer, reservoir and borehole water level. The internal silicon strain gauge sensor provides a stable water level reading accurate to 0.1% of span linearity with low hysteresis and repeatability errors.
Economical pressure transducer for monitoring fluid level inside a tank where there is no external mounting point at the bottom of the tank. Measure liquid contents of tanks with heights from 0.5 metres (1.64 feet) to 10 metres (32.8 feet) high. Choose between a low powered millivolt output, 0.5 to 4.5 vdc signal or a process control 4-20mA current loop signal.
IP68 protect pressure sensor for monitoring fresh water level to depths of 100 metres. This stainless steel drinking water compatible level sensor has been assesed and certified by the Water Regulations Advisory Scheme (WRAS) for compliance with the UK water regulations. The materials and fittings used in the mechanical construction of the IWSL water level sensor meet the standards required by the water supply byelaws of England, Wales and Scotland.
Submersible waste water level sensor with optional intrinsic safety certification for monitoring the level of sewage and effluent in water treatment plants. Available in level ranges from 4 up to 250 meters of water gauge.
Flush capacitive ceramic pressure sensor for measuring corrosive and viscous liquid level from levels 0.4 metres of water up to 200 mH2O. This screw-in fluid level transmitter features high overload rating up to 50x and options for all plastic wetted parts.
Submersible Low Range waste water level transmitter with intrinsically safe option for monitoring the level of sewage and effluent in water treatment plants. Available in level ranges from 0.4 up to 100 meters of water gauge.
Submersible level transmitter for measuring liquid level with a 4-20mA current loop or a 0-10V voltage output plus optional ATEX approval for instrinsically safe use in hazardous areas in ranges from 1mH2O up to 250mH2O.
Analogue output sensor for immersing in seawater to determine depth or change in water level by measuring hydrostatic pressure. This sea depth probe has a Marine bronze housing and Ceramic diaphragm for protection from saltwater corrosion. Select fixed ranges from 10 metres (33 feet) up to 100 metres (328 feet) depth in a number of analogue output configurations including low voltage strain gauge, amplified voltage and current loop output. Also suitable for use in brackish and inland tidal water or any other application where there is the risk of corrosion form a saline liquid.
tel: +44 (0)844 800 9440
©2013 SensorsONE Ltd, all rights reserved.