High Temp Pressure Transducers

Convert the pressure of high temp media to voltage output with these transducers.  High temperatures can be reduced by integrating a section of process connection that allows the process media temperature to dissipate into the surrounding environment before it reaches the heat sensitive components of the transducer. 

Sanitary pressure sensor wth exposed diaphragm with no crevices for high temperatures up to 300 Degrees Celsius in ranges from 100mb up to 40 bar gauge or absolute

Screw-in pressure transmitter with flush stainless steel 316L diaphragm for measuring pressures of fluids with very high viscosity from 900 psi up to 6000 psi gauge or absolute. Options available for high temperatures up to 300 deg C and intrinsic safety.

Miniature size 1/2 inch diameter stainlesss steel pressure sensor with either a strain gauge millivolt output or an amplified 0.5 to 4.5 Vdc output. Pressure ranges start from 10 bar (150psi) up to 400 bar (6000 psi). Thread sizes include M5, M6, M8, M10, Dash3 or 1/8NPT.

Half in inch diameter sensor for measuring both temperature and pressure in one device. Measure pressure in ranges from 0-150 psi up to 0-6000 psi. Select a NTC thermistor, PT100 or PT1000 temperature measurement device to integrate alongside the pressure sensing device.

Dual analogue output signal transmitter for simultaneous measurement of media pressure and temperature. Pressure ranges from 100 mbar up to 1000 bar and temperature measuring range from -25 to 100 DegC. To ensure good thermal contact with the media the temperature is measured just behind a flush diaphragm which has sufficient surface area to ensure minimal losses in media temperature at point of measurement.

Measure vacuum, positive gauge and absolute pressures from -1 bar (-15psi) up to 40 bar (600psi) with this all in one electronic switch, gauge and sensor. Designed specifically for use in the food, drink and biomedical industry for measuring process pressures and vessel contents. Choose dairy pipe or clamp type sanitary process fittings and select a food grade oil fill as the diaphragm isolation fluid. For pharmaceutical installations requiring hazardous dust protection the instrument includes the option for ATEX intrinsic safety.

Versatile low price pressure transducer with a wide selection of electrical and mechanical options to enable the customisation of the sensor to suit most industrial, automation and OEM design installations. A dry cell ceramic strain gauge sensing diaphragm provides a high corrosion resistance to many types of harsh chemical media commonly found in automated industrial processes and machinery monitoring applications.

Low cost sensor for measuring small pressure ranges from 0-50 mbar (10 inH2O) to 0-1000 mbar (15 psi) of liquids or gases. Choose from a full list of outputs, electrical, connectors and accuracy specs to meet your OEM custom product integration requirements.