Food & Beverage

Pressure transducers & transmitters for the food & beverage industry that have hygienic crevice free diaphragms that can be easily cleaned.

Sanitary pressure sensor wth exposed diaphragm with no crevices for high temperatures up to 300 Degrees Celsius in ranges from 100mb up to 40 bar gauge or absolute

Flush diaphragm pressure transmitter for high viscosity media in food processing and plastic injection moulding applications. The TPFADA is available with a 4-20mA current loop or amplified voltage output signal and pressure ranges from 10 up to 1000 barg.

Screw-in pressure transmitter with flush stainless steel 316L diaphragm for measuring pressures of fluids with very high viscosity from 15 psi up to 6000 psi gauge or absolute. Options available for high temperatures up to 300 deg C and intrinsic safety.

Flush diaphragm piezo-resistive pressure sensor for food processing and plastic injection moulding applications with a millivolt output signal in pressure ranges from 10 up to 1000 barg.

Hand-held portable manometer for measuring positive and negative pressure ranges from 25 mbar up to 10 bar gauge or differential plus a 2 bar absolute. The measurement accuracy is 0.15% reading + 0.15% fs + 1 digit over a temperature range of -10 to +50°C. Optional leak detection, data logging and averaging filter functions.

Green or Red LED multi-display configurable digital instrument for controlling valves, actuators, motors & pumps with inputs from pressure sensors, thermocouples, RTD, strain gauges, potentiometers, current loop & amplified output signal sensors.

Highly accurate digitally compensated pressure transducer with G1/2 male flush pressure port. Designed for use on viscous media or where a flush face is required for easier cleaning when used with food, drink or hazardous substances such as Oxygen. Select pressure ranges as low as 1 bar or as high as 1000 bar. Standard digital output is RS485 which can be converted to RS232 or USB via optional converter cables.

Dual analogue output signal transmitter for simultaneous measurement of media pressure and temperature. Pressure ranges from 100 mbar up to 1000 bar and temperature measuring range from -25 to 100 DegC. To ensure good thermal contact with the media the temperature is measured just behind a flush diaphragm which has sufficient surface area to ensure minimal losses in media temperature at point of measurement.

Robust industrial self powered logger for recording up to 130,000 pressure values with a minimum logging interval time of 2 seconds. Select a pressure from 0 to 100 mbar to as high as 0 to 1000 bar gauge or absolute.

High precision digital pressure gauge with an accuracy of 0.05% full scale in pressure ranges from -1 to 2 bar up to 1000 bar. The LEX 1 high accuracy digital pressure gauge features 6 pressure units, rotatable display, zero tare & peak hold display functions and optional ATEX approval for instrinsic safety.

Battery powered hand held documenting pressure calibrator for running pressure calibration procedures, recording pressure calibration results and printing pressure calibration certificates.

Pneumatic hand pump for applying test and calibration pressures with precision from -0.96 up to 40 bar gauge.

Passive compensated pressure transducer with a four arm semiconductor Wheatstone bridge circuit which produces a 100 millivolt with a 10 volt excitation. Pressure ranges from 0-100mbar up to 0-1000bar gauge or absolute. The silicon sensing chip is totally isolated from the media by an oil filled stainless steel 316L capsule with isolation membrane. This sensor is ideally suited for high frequency response applications since the output is only limited by the natural response of the silicon sensing capsule.

Rangeable Pressure Transmitter with an all stainless steel construction with LCD digital readout display and optional HART communications. Specifically designed for use in food, dairy, pharmaceutical or biotechnology applications where ultra clean crevice free flush diaphragms are required.