Differential pressure sensors & instruments for semiconductor manufacturing clean-rooms used to monitor and control laminar air-flow and ensuring positive clean room air pressure to prevent air contamination.
Hand-held portable manometer for measuring positive and negative pressure ranges from 25 mbar up to 10 bar gauge or differential plus a 2 bar absolute. The measurement accuracy is 0.15% reading + 0.15% fs + 1 digit over a temperature range of -10 to +50°C. Optional leak detection, data logging and averaging filter functions.
Highly accurate digitally compensated pressure transducer with G1/2 male flush pressure port. Designed for use on viscous media or where a flush face is required for easier cleaning when used with food, drink or hazardous substances such as Oxygen. Select pressure ranges as low as 1 bar or as high as 1000 bar. Standard digital output is RS485 which can be converted to RS232 or USB via optional converter cables.
Ultra low differential pressure sensor for HVAC applications with 4-20mA current loop or amplified voltage output signal in pressure ranges from 0.1 mb up to 1 bar differential.
Differential air pressure sensor with a 10 volt or a 4-20mA output for building ventilation applications. Designed for incorporating into a building HVAC management system to monitor and control the distribution of warm or cool air through ventilation ducts. Pressure ranges from 0 to 1 mbar up to 0 to 1000 mbar differential.
Low range three in one pressure switch, pressure indicator and pressure sensor for use on pneumatics and vacuum technology in a choice of ranges starting from 0 to 10 mbar gauge (4 inH2O) up to 0 to 1000 mbar gauge (400 inH2O) plus a 0 to -1000 mbar vacuum range. Compatible with gases, compressed air and low viscosity non-aggressive fluids.
Level pressure sensor with semi-flush ceramic diaphragm and stainless steel or PVDF wetted parts for aggressive corrosive media in ranges from 4mH2O up to 600mH2O gauge.
IP68 mid range pressure transmitter for measuring the level of highly contaminated and agressive liquid media with a body made from PVC. Hydrostatic ranges from 4 mWC up to 100 mWC
IP68 low range pressure transmitter for measuring the level of highly contaminated and agressive liquid media with a body made from PP (Polypropylene) or PVDF. Hydrostatic level ranges from 0.4 up to 100 metres of water column.
tel: +44 (0)844 800 9440
©2013 SensorsONE Ltd, all rights reserved.