Pressure transmitters & instruments for the petrochemical & natural gas industry which require ATEX approval for intrinsically safe use in hazardous areas.
Green or Red LED multi-display configurable digital instrument for controlling valves, actuators, motors & pumps with inputs from pressure sensors, thermocouples, RTD, strain gauges, potentiometers, current loop & amplified output signal sensors.
High precision digital pressure gauge with 0.05% full scale accuracy, exchangable pressure range modules from 100 mbar (1.5 psi) up to 400 bar (6000 psi)gauge or absolute, in-built logging of pressure and temperature up to 8500 values and optional ATEX intrinsic safety.
Screw-in pressure transmitter with flush stainless steel 316L diaphragm for measuring pressures of fluids with very high viscosity from 900 psi up to 6000 psi gauge or absolute. Options available for high temperatures up to 300 deg C and intrinsic safety.
Current output pressure transducer for measurement ranges from 0 to 2000 (30000 psi) range up to a maximum range of 6000 bar (90000 psi). All welded wetted parts and ATEX approved electronics for use in flammable gas or dust environments. Primarily used in hydraulic systems, waterjet torching and high pressure petrochemical applications. Accurate to 0.5% full scale output with adjustable zero and span trim via accessible potentiometers.
Stainless steel pressure transmitter with ranges from 100mbar up to 40 bar gauge or absolute with optional accuracy ranging from the standard 0.35% FS up to 0.1% FS. Special options such as ATEX approval, SIL approval and compound ranges are also available.
High precision pressure transmitter with an accuracy of 0.1%FS BSL NLHR and digitally adjustable pressure ranges from 400mb up to 40 bar gauge & absolute
Sanitary pressure sensor wth exposed diaphragm with no crevices for high temperatures up to 300 Degrees Celsius in ranges from 100mb up to 40 bar gauge or absolute
Stainless steel 316L wetted parts pressure sensor for high pressure ranges from 60 bar (900 psi) up to 600 bar (9000 psi). Used on applications such as hydraulic test benches, presses, injection moulding machines, hydraulic actuation and vehicle hydraulic systems. Accurate to 0.35% FS with options for 0.25% or 0.1% FS. Good long term stability of 0.1% FS over a period of 1 year.
High performance transducer with adjustable scaling for modifying the pressure range for different applications. Ranges from 0-60 bar up to 0-600 bar gauge or absolute. The output signal is accurate to 0.1% of base range or 0.5% with a 10:1 turn-down, and a 14 bit analogue to digital conversion provides a high resolution amplified output. Optional software and interface kit is available for re-ranging the output signal.
Three in one hydrostatic level switch, digital level gauge and level sensor with level ranges from 1 mWG up to 600 mWG (3.3 to 1969 ftWG).
Three in one electronic pressure switch, digital pressure gauge and pressure sensor with pressure ranges from 100 mbar up to 600 bar (1.5 to 9000 psi) gauge or absolute.
Measure vacuum, positive gauge and absolute pressures from -1 bar (-15psi) up to 40 bar (600psi) with this all in one electronic switch, gauge and sensor. Designed specifically for use in the food, drink and biomedical industry for measuring process pressures and vessel contents. Choose dairy pipe or clamp type sanitary process fittings and select a food grade oil fill as the diaphragm isolation fluid. For pharmaceutical installations requiring hazardous dust protection the instrument includes the option for ATEX intrinsic safety.
Combined sensor, electronic switch and digital gauge with an all welded stainless steel flush face diaphragm for measuring the pressure of high viscosity liquids or gases and fluid requiring a high level of cleanliness. Choose measuring ranges from 60 bar up to 400 bar with gauge or absolute reference. Select different sizes of BSP thread for a screw-in type pressure fitting. The integrated digital readout can be configured to read in any pressure units and process pressure limits can be set for controlling external equipment.
Battery powered data logger for measuring and recording low range pressures. Designed for use in industrial environments with IP65 environmental protection and optional intrinsic safety. Available in pressure ranges from 10 mbar (4 inH2O) up to 300 mbar (120 inH2O) vented gauge.
Combined digital manometer and pressure data logging instrument for recording pressures and temperatures which can store up to 57,000 readings in the non-volatile memory with a battery life of up to 5 years.
Battery powered digital gauge with an accuracy of 0.2% full scale in pressure ranges from -1 to 3 bar up to 1000 bar. The LEO 1 digital pressure gauge features 6 pressure units, rotatable display, zero tare & peak hold display functions and optional ATEX approval for intrinsic safety.
High precision digital pressure gauge with an accuracy of 0.05% full scale in pressure ranges from -1 to 2 bar up to 1000 bar. The LEX 1 high accuracy digital pressure gauge features 6 pressure units, rotatable display, zero tare & peak hold display functions and optional ATEX approval for instrinsic safety.
Level pressure sensor with semi-flush ceramic diaphragm and stainless steel or PVDF wetted parts for aggressive corrosive media in ranges from 4mH2O up to 600mH2O gauge.
Flush capacitive ceramic pressure sensor for measuring corrosive and viscous liquid level from levels 0.4 metres of water up to 200 mH2O. This screw-in fluid level transmitter features high overload rating up to 50x and options for all plastic wetted parts.
Marine approved level transmitter with 4-20mA current loop output for measuring the level of contents inside a ships ballast, fuel, liquid cargo or wastewater tanks with optional all CuNiFe construction for sea-water compatibility in ranges from 0.4 mH2O to 200mH2O gauge or absolute.
Submersible level transmitter for measuring liquid level with a 4-20mA current loop or a 0-10V voltage output plus optional ATEX approval for instrinsically safe use in hazardous areas in ranges from 1mH2O up to 250mH2O.
Digital pressure manometer for hazardous areas with pressure ranges from 100 mbar up to 2000 mbar differential or gauge plus 2000 mbar absolute. The reading accuracy is 0.1% reading plus 0.1% full scale + 1 digit over 20 to 30°C.
Plug-on digital display for adding a local indicator to a pressure or liquid level sensor with a 4-20mA or 0-10Vdc output. No extra power supply is required since the PA430 is powered by the sensor supply. Mix and match Binder, M12 electrical and DIN plug and socket connector types. Optional ATEX IS approval for hazardous areas and 1 or 2 contact PNP switches for on/off process control function.
High precision compact wet wet differential pressure transmitter with digitally corrected 4-20mA current loop or amplified voltage output signal in pressure ranges from 1 up to 30 bar differential.
Hand portable scissor pump for generating hydraulic pressures up to 1000 bar (14,500 psi). Used in conjunction with a master test gauge the pump can set precise test pressures for checking the performance of pressure instrumentation as part of routine quality procedures.
Pneumatic hand pump for applying test and calibration pressures with precision from -0.96 up to 40 bar gauge.
Hydraulic hand pump for applying test and calibration pressures with precision from 0 to 700 bar gauge (10,000 psi).
Rangeable DP Cell current loop process transmitter for monitoring differential pressures in a heavy duty process plant environment. The XMD has a standard process configuration with kidney flange mounting arrangement and large accessible electronic housing. Other features include ATEX intrinsic safety or flameproof, linear or square root extraction 4-20mA output, HART communications, 10 to 1 turndown ranging, LCD readout and 130 bar overpressure protection on one side.
Process transmitter for measuring vacuum, steam, food, pharmaceutical, oil, gas and other pressure readings necessary for the monitoring and control of bulk production processes. Suitable for deploying in many locations and feeding pressure readings back to the site distributed control system (DCS). Includes HART protocol interface, 10:1 adjustable range scaling and ATEX intrinsic safety as standard, with options for flameproof, 300degC media temperature and integrated local digital indicator. Available in pressure ranges from 0-400mbar up to 0-600 bar gauge or absolute, and compound ranges from -0.4 to +0.4 bar up to -1 to 10 bar gauge.
tel: +44 (0)844 800 9440
©2013 SensorsONE Ltd, all rights reserved.