Chemical

Pressure transducers & transmitters for the chemical industry which are tolerant to hazardous corrosive chemicals and have flush diaphragms which can be easily cleaned.

IP68 low range pressure transmitter for measuring the level of highly contaminated and agressive liquid media with a body made from PP (Polypropylene) or PVDF. Hydrostatic level ranges from 0.4 up to 100 metres of water column.

Level pressure sensor with semi-flush ceramic diaphragm and stainless steel or PVDF wetted parts for aggressive corrosive media in ranges from 4mH2O up to 600mH2O gauge or absolute.

Flush diaphragm pressure transmitter for high viscosity media in food processing and plastic injection moulding applications. The TPFADA is available with a 4-20mA current loop or amplified voltage output signal and pressure ranges from 10 up to 1000 barg.

Marine approved level transmitter with 4-20mA current loop output for shipbuilding with optional all CuNiFe construction for sea-water compatibility in ranges from 0.4 mH2O to 250mH2O gauge.

Screw-in pressure transmitter with flush stainless steel 316L diaphragm for measuring pressures of fluids with very high viscosity from 900 psi up to 6000 psi gauge or absolute. Options available for high temperatures up to 300 deg C and intrinsic safety.

High precision pressure transmitter with an accuracy of 0.1%FS BSL NLHR and digitally adjustable pressure ranges from 400mb up to 40 bar gauge & absolute

Sanitary pressure sensor wth exposed diaphragm with no crevices for high temperatures up to 300 Degrees Celsius in ranges from 100mb up to 40 bar gauge or absolute

Flush capacitive ceramic pressure sensor for measuring corrosive and viscous liquid level from levels 0.4 metres of water up to 200 mH2O. This screw-in fluid level transmitter features high overload rating up to 50x and options for all plastic wetted parts.

IP68 mid range pressure transmitter for measuring the level of highly contaminated and agressive liquid media with a body made from PVC. Hydrostatic ranges from 4 mWC up to 100 mWC

Submersible level transmitter for measuring liquid level with a 4-20mA current loop or a 0-10V voltage output plus optional ATEX approval for instrinsically safe use in hazardous areas in ranges from 1mH2O up to 250mH2O.

Digital pressure manometer for hazardous areas with pressure ranges from 100 mbar up to 2000 mbar differential or gauge plus 2000 mbar absolute. The reading accuracy is 0.1% reading plus 0.1% full scale + 1 digit over 20 to 30°C.

Pneumatic hand pump for applying test and calibration pressures with precision from -0.96 up to 40 bar gauge.

An easy to install wall mounted digital display for use in high humidity or outdoor environments to provide a convenient way of monitoring a measured reading with minimal installation. Enclosed in a box the 4 digital LED indicator can be configured via the front keypad or an infrared remote control to measure any sensor with a 4 to 20mA output signal.

Rangeable DP Cell current loop process transmitter for monitoring differential pressures in a heavy duty process plant environment. The XMD has a standard process configuration with kidney flange mounting arrangement and large accessible electronic housing. Other features include ATEX intrinsic safety, linear or square root extraction 4-20mA output, HART communications, 10 to 1 turndown ranging, LCD readout and 130 bar overpressure protection on one side.

Process transmitter for measuring vacuum, steam, food, pharmaceutical, oil, gas and other pressure readings necessary for the monitoring and control of bulk production processes. Suitable for deploying in many locations and feeding pressure readings back to the site distributed control system (DCS). Includes HART protocol interface, 10:1 adjustable range scaling and ATEX intrinsic safety as standard, with options for 300degC media temperature and integrated local digital indicator. Available in pressure ranges from 0-400mbar up to 0-600 bar gauge or absolute, and compound ranges from -0.4 to +0.4 bar up to -1 to 10 bar gauge.