Power Generation

Pressure transmitters & instruments for use in power generator stations which can withstand high steam temperatures and have a robust construction.

Hand-held portable manometer for measuring positive and negative pressure ranges from 25 mbar up to 10 bar gauge or differential plus a 2 bar absolute. The measurement accuracy is 0.15% reading + 0.15% fs + 1 digit over a temperature range of -10 to +50°C. Optional leak detection, data logging and averaging filter functions.

Green or Red LED multi-display configurable digital instrument for controlling valves, actuators, motors & pumps with inputs from pressure sensors, thermocouples, RTD, strain gauges, potentiometers, current loop & amplified output signal sensors.

Digital meter with a 4 digit red LED display for mounting in a 48mm x 48mm (1/16 DIN) cutout panel for measuring volts, current, TC, RTD, PTC, NTC and potientiometer input signals.

Digital pressure gauge with ranges from 1.6 bar (23 psi) up to 400 bar (6000 psi) gauge or absolute for measuring pneumatic or hydraulic pressures to an accuracy of 0.25% full scale. A selection of pressure fittings can be specified which include G1/2 & G1/4 male EN837 test point or 1/2 & 1/4 NPT male.

Precision digital pressure gauge with ranges from 100 mbar (1.5 psi) up to 600 bar (9000 psi) gauge or absolute for measuring pneumatic or hydraulic pressures to an accuracy of 0.125% FS BSL. A selection of pressure fittings can be specified which include G1/2 & G1/4 male EN837 test point or 1/2 & 1/4 NPT male.

Differential pressure transmitter with high over-load capability for measuring low differential pressures from 8mb up to 6 bar differential.

Low range differential pressure sensor with rangeable 4-20mA current loop or amplified voltage output signal in pressure ranges from 1.6mb up to 6 bar differential

Three in one electronic pressure switch, digital pressure gauge and pressure sensor with pressure ranges from 100 mbar up to 600 bar (1.5 to 9000 psi) gauge or absolute.

Combined digital manometer and pressure data logging instrument for recording pressures and temperatures which can store up to 57,000 readings in the non-volatile memory with a battery life of up to 5 years.

Battery powered digital gauge with an accuracy of 0.1% full scale in pressure ranges from -1 to 3 bar up to 1000 bar. The LEO 1 digital pressure gauge features 6 pressure units, rotatable display, zero tare & peak hold display functions and optional ATEX approval for intrinsic safety.

LCD digital pressure gauge powered externally by a 2 wire series 4-20mA current loop or a digital interface. Use as a pressure transmitter or a digital output pressure sensor with a local readout display. Accurate to 0.2% FS the LEO3 is available in a sleection of pressure ranges from -1 to 3 bar up to 1000 bar (-15 to 45 psi up to 15,000 psi).

High precision digital pressure gauge with an accuracy of 0.05% full scale in pressure ranges from -1 to 2 bar up to 1000 bar. The LEX 1 high accuracy digital pressure gauge features 6 pressure units, rotatable display, zero tare & peak hold display functions and optional ATEX approval for instrinsic safety.

Battery powered hand held documenting pressure calibrator for running pressure calibration procedures, recording pressure calibration results and printing pressure calibration certificates.

Battery powered hand held pressure indicator with atex intrinsic safety approval and pressure ranges from 25mbar up to 1 bar gauge or differential.

High precision compact wet wet differential pressure transmitter with digitally corrected 4-20mA current loop or amplified voltage output signal in pressure ranges from 1 up to 30 bar differential.

Pneumatic hand pump for applying test and calibration pressures with precision from -0.96 up to 40 bar gauge.

DIN 43650A plug-in current loop powered LED display with optional ATEX approval for intrinsically safe use in hazardous areas for mounting on any pressure sensor including that has a 4-20mA current loop output signal and din plug and socket.

All stainless steel compact temperature transmitter with integrated Platinum resistance thermometer (PT100) for installing on machines, industrial process control, mobile hydraulics, HVAC or environmental monitoring equipment. Measure any temperature scaling between -50 to 150 degC and specify a voltage, current or RTD output.