DMK457 Marine Approved Pressure Transmitter

Click Images to Enlarge

Marine approved pressure transmitter with 4-20mA current loop output for shipbuilding with optional CuNiFe wetted parts for sea-water compatibility in ranges from -1 to 600 bar gauge or absolute.

Quote | PDF | Links

Product Parameters

Pressure Ranges: 0.6 up to 600 bar gauge or absolute

Accuracy: 0.25% full scale BSL NLHR

Output Signal: 4-20mA current

Electrical Connections: DIN plug and cable glands with IP65, IP67 & IP68 environmental protection

Pressure Connections: 1/2, 1/4 inch BSP or NPT male including 1/2 BSP male with semi-flush diaphragm

Media Compatibility: Stainless steel 316Ti or CuNiFe pressure port, Ceramic diaphragm and FKM or NBR O ring seals

Special Features: DNV & GL marine approvals

Special Options: CuNi10Fe1Mn pressure port up to 100 bar for use on sea-water, ATEX IS approval

Product Description

The DMK 457 marine approved pressure transmitter has a ceramic sensing diaphragm which is compatible with sea water and salt spray when the copper nickel alloy option is specified for ranges up to 100 bar.

The DMK457 marine approved pressure transmitter is Germanischer Lloyd (GL) and Det Norske Veritas (DNV)approved for marine use and can be used above and below deck on seawater systems.

ATEX approved for intrisically safe use in hazardous environments is also available for ship systems which are handling flammable and volatile chemicals such as oil, gas, liquid petroleum gas (LPG) and liquid natural gas (LNG).

Related Products

Other marine approved pressure transmitters

Sea water compatible pressure transmitters

Resources

Glossary of terms for pressure transmitters

Convert bar or psi pressure units into other engineering units

Search site for marine approved sensors

Select multiple product categories to filter selection of pressure transmitters

Download Product Information

DMK457 data sheet

Marine Approval certificates

DMK457 operating manual

Hazardous Area installation manual

Request a Quote

Pressure range:
Electrical Connection:
Length of Cable (metres) if required:
Pressure Connection:
Pressure Connection Material:
Seals:
ATEX IS Approval:
Oxygen Clean (160 bar max):
Quantity:
Your Name:
Your Email:
Comments:

Home > Manufacturers > BD Sensors

Request Info | Ask a Question

Site Last Updated: 06/01/09

Tools

Pressure Conversion

Equals

Resources

Pressure Measurement Glossary - Find explanations of terminology used for specifying and using pressure instruments

Pressure Unit Conversion - Look up conversion factors or select a conversion table for a particular pressure unit

Pressure Sensor Specification - Select parameters with PSAT to generate a spec for your own use or to submit as an enquiry

Contact

Help: Request Info

Ask a Question

News

29/11/08 : What is the difference between a pressure transducer and a transmitter
15/09/08 : What is the difference between gauge and absolute pressure measurement
25/08/08 : Advantages of using Silicon chip technology for sensing pressure
17/08/08 : What to consider when selecting a differential pressure sensor
11/08/08 : Digital sensor for high precision pressure calibration
05/07/08 : Data logging aggressive fluid level pressures
29/06/08 : Low cost HVAC pressure sensor for clean-room air flow monitoring
21/06/08 : Level sensor for shallow depth measurement
11/05/08 : Low pressure sensor for wet media
19/01/08 : Supply voltage and load resistance considerations for pressure transmitters
06/01/08 : Measuring liquid level in a sealed tank with a hydrostatic pressure sensor
18/11/07 : Determining the hydrostatic pressure range for a tank level sensor
18/09/07 : Interpreting specifications of pressure sensor accuracy
05/05/07 : Measuring vacuum pressure with negative gauge or absolute pressure ranges

RSS

News Feed

Products Feed