BD Sensors

Low to medium range pressure and level sensors for highly corrosive media applications such as chemicals and sea-water with ATEX and Marine approvals which are designed and manufactured by BD Sensors.

These sensors have a stainless steel isolation or sensing diaphragm exposed ot the media with an integrated silicon or thin film strain gauge sensing element. Typically used in applications where higher precision, repatabilty and long term stability are required.

A range of immersible all stainless steel sensors with different diameters to suit a variety of well, stilling tube and borehole sizes. These sensors incrporate a miniature semiconductor strain gauge sensing element which provide high accuracy measurement and a small diameter construction for geotechnical surveys and environmental monitoring of water resources.

A range of pressure sensors incorporating Ceramic sensing diaphragm technology for industrial and process applications requiring compatibility with harsh chemically corrosive media.

Choose a liquid level sensor for external mounting or immersion compatible with aggressive chemicals or waste water. Find options for plastic sensor housings and flush diaphragms to improve media compatbility, prevent diaphragm blocking and facilitate washdowns.

Sensors with a positive and negative pressure port for measuring differential pressures (DP) to determine operational health of air filters, monitoring of airflow or maintaining positive and negative pressures between clean rooms.

Control process or test pressures by setting a solid state logic switch to open and close and preset pressures. Combine a pressure switch with a digital display and an analogue signal output all in one instrument.

Display pneumatic or hydraulic pressure readings without the need for external power. Select different pressure units and check instrument calibration via the push buttons located on the front dial.

All stainless steel flush diaphragm pressure transmitter for use in pharmaceutical or food applications. Check type, range and serial number and change 4-20mA output scaling via a HART protocol enabled hand terminal.

Enclosure designed for terminating electrical signal cable from submersible pressure sensors. These junction boxes incorporate vent which does ont allow moisture to enter the box which is important to the installation of pressure sensors which are submerged to measure the hydrostatic head of liquid.