Pressure Sensor Application Tool - PSAT

Create a pressure sensor specification here by building up a list of selected parameters and then click on the send button to receive an email copy of the specification you have generated. If required you can request information for the closest matching pressure sensor for your application.

All specification selection fields are optional, please ignore those which are not critical to your application.

If you are not sure of the meaning of a certain specification parameter please refer to our pressure sensor definitions guide for an explanation.

Pressure Units:

Pressure Range:

Pressure Reference (pressure on reverse side of diaphragm):

Output Signal:

Electrical Connection:

Length of Cable:

Pressure Connection:

Media Compatibility:

Gas	Condensing
Liquid	Corrosive
High Viscosity	Abrasive
Hygienic	Oxygen Service
Chemicals	NACE (Offshore)
Seawater	Wastewater
Concrete/Aggregate/Slurry	Landfill
Petrol/Diesel	Plastic Melt
High Temperature	Low Temperature
High Overpressure Spikes	High Purity Gas
Ultra High Vacuum (UHV)	Other Specified Below

Ambient Environment:

Indoor Use	Outdoor Use
Inside Electronics Enclosure	Occasional Immersion/Hose Down
Submersible	Sea-Water/Salt-Water
Salt Spray/Sea Air	Corrosive Fluid Spills
High Temperature	Low Temperature
High Humidity	High Vibration or Shock
High External Case Pressure (Subsea)	Water Jet Cleaning
High Pressure Steam Cleaning	Other Specified Below

Optional Extras:

Ex ia Intrinsic Safety	Ex d Flameproof
Pressure Snubber	Lightning Protection
Rangeable Electronics	High Dynamic Response
Oxygen Service	Panel Mount Digital Indicator
Local Loop Powered Display	Zero & Span Adjustment
Other Specified Below

Extra Documents:

CE Mark	ATEX Certificate
Certificate of Conformity	Detailed Calibration Data
Marine Approval for use on Ships	Flight Qualification Data
Material Traceability Certificates	ISO9000 Certificate
Other Specified Below

Max. Accuracy at Room Temp:

Highest Media Temperature at Sensor:

Lowest Media Temperature at Sensor:

Max. Total Accuracy Over Temp Range:

Max. Over-pressure (without degrading performance):

Burst Pressure:

Max. Line Pressure (Differentials only):

Sensor Supply Voltage:

Regulated Supply:

Max. Diameter of Sensor:

Max. Length of Sensor:

Quantity:

Max. Delivery Time:

Other application details or comments:

Your Name:

Your Email:

Select Required Response:

Home

Request Info | Ask a Question

Site Last Updated: 07/09/10

Save

Send |

Tools

Pressure Conversion

Converts to

Reference

Glossary - Find explanations for terminology used in specifying and using pressure instruments

Pressure Conversion - Look up conversion factors or select a conversion table for a particular pressure unit

Pressure Measuring Guide - Collection of guidance notes for sourcing, setting up and using pressure measurement equipment

News Articles - Archive of application notes, product releases and technical information

Specify

Pressure Sensor Specification - Select parameters with PSAT to generate a spec for your own use or to submit as an enquiry

Product Finder - Choose multiple product and application types to filter out a suitable product

Contact

Help: Request Info

Ask a Question

Articles

15/09/08 : What is the difference between gauge and absolute pressure measurement
25/08/08 : Advantages of using Silicon chip technology for sensing pressure
17/08/08 : What to consider when selecting a differential pressure sensor
19/01/08 : Supply voltage and load resistance considerations for pressure transmitters
06/01/08 : Measuring liquid level in a sealed tank with a hydrostatic pressure sensor
18/09/07 : Interpreting specifications of pressure sensor accuracy

Pressure Sensing Guide